Key To Symbols; Symbols - Husqvarna 535FBX Operator's Manual

Symbols (535FBX)
WARNING! The machine can be a
dangerous tool if used incorrectly or
carelessly, which can cause serious
or fatal injury to the operator or
others. It is extremely important that
you read and understand the
contents of the operator's manual.
Please read the operator's manual
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
• Wear a protective helmet where
there is a risk of falling objects
• Hearing protection
• Protective goggles or a visor
This product is in accordance with
applicable EC directives.
The operator of the machine must
ensure, while working, that no
persons or animals come closer
than 15 meters.
Kickback may occur when the
nose or tip of the guide bar
touches an object, and cause a
lightning fast reverse reaction to
the side. May cause serious
personal injury. Always keep
people and animals at least 15
metres from the machine.
Always wear protective gloves.
Wear boots with saw protection, steel
toe-cap and non-slip sole.
Noise emission to the environment
according to the European
Community's Directive. The
machine's emission is specified in
the Technical data chapter and on the
label.
2 – English

KEY TO SYMBOLS

Primer bulb
Set the choke control in the choke
position.
The rating plate showing
serial number. yyyy is the
production year, ww is the
productionweek.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
The engine is switched off by moving
the stop switch to the stop position.
CAUTION! The stop switch
automatically returns to the start
position. In order to prevent
unintentional starting, the spark plug cap must be
removed from the spark plug when assembling, checking
and/or performing maintenance.
Always wear approved protective
gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
worn.
Filling with chain oil and adjusting oil
flow
yyyywwxxxxx