Connecting The Fm And Am Antennas - Samsung 2.0051111115925e16 Instruction Manual

Connecting the FM and AM Antennas

If AM reception is poor, connect an
outdoor AM antenna(not supplied).
FM Antenna (supplied)
FM antenna connection
1. Connect the FM antenna supplied to the FM
75Ω COAXIAL terminal.
2. Slowly move the antenna wire around until
you find a location where reception is good,
then fasten it to a wall or other rigid surface.
Cooling Fan The cooling fan supplies cool air to the unit to prevent overheating.
Please observe the following cautions for your safety.
•
•
1
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)
2 3
Snap the tabs on the loop into the
slots of the base to assemble the
AM loop antenna.
AM antenna connection
1. Connect the AM loop antenna supplied
to the AM and terminals.
2. If reception is poor, connect an outdoor
single vinyl-covered wire to the AM
terminal. (Keep the AM loop antenna
connected).
AM Loop Antenna
(supplied)
24