Samsung 2.0051111115925e16 Instruction Manual page 22

Connecting the Video Out to TV
Selecting Resolution
You can adjust the resolution switch to set the HDMI and component (P
480p/720p/1080i.
Example: If the TV supports resolution up to 480p
1
Set the resolution switch to 480p.
•
A 480p video signal is output through the HDMI and
component outputs (P
Caution
•
If you connect the HDMI and Component outputs (P
automatically to the designated HDMI resolution.
Note
•
If copy protection is in place, output resolution is automatically converted to 480p when you play the DVD,
even if you set the resolution to 720p or 1080i.
DCDi
(Directional Correlational Deinterlacing)
Converts the interlace signal to progressive to prevent flickering and to
remove distortion or noise on the edge of screen.
Press and hold DCDi button on the remote
control for over 3 seconds.
•
Each time the button is pressed, the selection alternates between
DCDi ON and DCDi OFF.
21
, P , Y).
R B
, P
R
, P , Y) output resolution to
R B
, Y) at the same time, Component output resolution changes
B
Function