Diagnostic Logs - Quantum DXi V-Series Manual

Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-09 Rev B
February 2014

Diagnostic Logs

92
Getting License Status
syscli --getstatus license
This CLI command reports the license status, the capacity, the date license
installed, the expiration, the license type, and the number of days the license
remains.
The --getstatus option reports the licensed capacity and the detailed status of
the system's license.
Activate a License
(DXi V-Series only)
syscli --activate --license <lic_key> |--lickeyfile <lic_key_file> |--reactivate
|--productkey <product_key>
This CLI command allows the admin user to activate, reactivate a license, or to
activate a product key.
To activate a license, the characters that can be in a license key are
alphanumeric, '/', '+', and '='. No license key is needed to reactivate the license.
To activate the product key, the product key is 20 alphanumeric characters,
optionally divided into 4 groups of 5 and separated by dashes.
CLI command options:
• --activate: Activates, reactivates a license, or activates a product key.
• --license: Activates a license with a license certificate string which can only
be alphanumeric, '/', '+', or '='.
• --lickeyfile: Activates a license with the license key file which can be
absolute or relative path to the current directory.
• --reactivate: Forces an immediate license server check and reactivates the
license.
• --productkey: Activates the product key which is 20 alphanumeric
characters, optionally divided into 4 groups of 5 and separated by dashes.
Generating a Diagnostic Log
syscli --gen diaglog [--system] | [--array] [--quiet] [--lastgen]
This CLI command allows the admin user to generate diagnostic logs on the
system.
CLI command options:
• --system: generates the system diagnostic log. This is the default if no
diagnostic type is specified.
• --array: generates the raid array diagnostic log
• --quiet: do not display status while generating log
• --lastgen: display the last date the diagnostic log was generated
Downloading a Diagnostic Log
syscli --download diaglog [--system] | [--array]
(DXi V-Series only)
Utility CLI Commands