Diagnostic Logs - Quantum DXi4500 Manual

Diagnostic Logs

Utility CLI Commands
License Name = OST
Installed = No
Date Installed = ‐‐ Not Installed ‐‐
License Description = Limit Open Storage Server Connections
[License = 7]
License Name = Vision
Installed = No
Date Installed = ‐‐ Not Installed ‐‐
License Description = Enables Advanced Reporting
Adding a License
syscli --add license --key <license_key>
This CLI command allows the admin user to add a license on the system. The
user needs to provide a key corresponding to the license.
Note: For DXi4500 systems, all available licenses are pre-installed at the
factory. There is no need to add licenses to these systems.
Generating a Diagnostic Log
syscli --gen diaglog [--system] | [--array] [--quiet] [--lastgen]
This CLI command allows the admin user to generate diagnostic logs on the
system.
• --system: generates the system diagnostic log. This is the default if no
diagnostic type is specified.
• --array: generates the raid array diagnostic log
• --quiet: do not display status while generating log
• --lastgen: display the last date the diagnostic log was generated
Downloading a Diagnostic Log
syscli --download diaglog [--system] | [--array]
This CLI command allows users to download the current diagnostic log to the
current working directory.
• --system: Downloads the system diagnostic log. This is the default if no
diagnostic type is specified.
• --array: Downloads the raid array diagnostic log.
Quantum DXi-Series Command Line Interface (CLI) Guide
6-67081-02 Rev A
July 2011
69