Diagnostic Logs - Quantum DXi V1000 Command Manual

Diagnostic Logs

Utility CLI Commands
[License = 5]
License Name = Storage Capacity
Installed = Yes
Date Installed = 2009
License Description = Limit Storage Capacity
[License = 6]
License Name = OST
Installed = No
Date Installed = ‐‐ Not Installed ‐‐
License Description = Limit Open Storage Server Connections
[License = 7]
License Name = Vision
Installed = No
Date Installed = ‐‐ Not Installed ‐‐
License Description = Enables Advanced Reporting
Adding a License
syscli --add license --key <license_key>
This CLI command allows the admin user to add a license on the system. The
user needs to provide a key corresponding to the license.
Note: For DXi4510 and DXi 4520 systems, all available licenses are
pre-installed at the factory. There is no need to add licenses to these
systems.
Note: After adding a storage capacity license to DXi4601, you must reboot
the DXi to complete the storage capacity upgrade. The new storage
capacity will not be available until you reboot the DXi.
Generating a Diagnostic Log
syscli --gen diaglog [--system] | [--array] [--quiet] [--lastgen]
This CLI command allows the admin user to generate diagnostic logs on the
system.
CLI command options:
• --system: generates the system diagnostic log. This is the default if no
diagnostic type is specified.
• --array: generates the raid array diagnostic log
Quantum DXi-Series Command Line Interface (CLI) Guide
- -
06 01 15:32:24
6-67081-05 Rev B
April 2012
69