Tools And Materials; Before You Begin - Kohler K-4108 Installation Manual

Bidet seat with remote control
Hide thumbs Also See for K-4108:
Table of Contents

Advertisement

Available languages

Available languages

Tools and Materials

Adjustable
Pencil
Wrench

Before You Begin

WARNING: Risk of electric shock, fire, or personal injury.
This product must be grounded. Connect only to a dedicated
120 VAC, 60 Hz circuit protected by a minimum 15 A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current
Device (RCD).
WARNING: Risk of electric shock. Do not immerse or flush
the product with water.
CAUTION: Risk of property damage. Damaged water
connections may leak. Do not push or pull on the water
connection between the seat and the water supply stop.
NOTICE: To avoid possible product malfunction, do not plug in the
seat until instructed to do so.
NOTICE: Do not install this seat in a location where: (1) water
might be splashed on the product or (2) excessive moisture, high
humidity levels, or condensation are present. This will avoid
damage to the electronic components.
NOTICE: Do not use an extension cord with this product.
Observe all local plumbing, electrical, and building codes.
Only connect the seat to a cold water supply of drinking quality
water at a pressure of 20 (139 kPa) - 80 psi (551 kPa).
Kohler Co.
1/16", 1/4"
Plastic Wrap
3
1194356-2-A

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents