Noise Filter Setting - Excell SI-132 User Manual

EXCELL PRECISION CO., LTD.

2-3-5 Noise Filter Setting

Select in the General Function setting mode
setting.
 When modifying
ACTIONS
Press TARE key
Use ON/ZERO or UNITS
key to key in the parameters
Press TARE key
Use ON/ZERO or UNITS
key to key in the parameters
Press TARE key
Use ON/ZERO or UNITS
key to key in the parameters
Press TARE key
Key in the parameter "00"
Press TARE key to complete
general setting procedures
02005318
, the parameters of
DISPLAY
15
to set the noise filter
remain un-altered.
NOTE
Returning to zero point setting
LCD displays the last status
Returning to the zero point setting
Use ON/ZERO or UNITS key to key in the
parameters or zero point
Default setting = 0
0  No skip
1  skip 1d
2  skip 2d
3  skip 3d
4  skip 4d
 When the weight on the scale is over
1/3 full capacity, the function is on.
Digital switch & Stabilization range
setting
LCD displays the last parameter setting
Digital switch & Stabilization range
setting
Use ON/ZERO or UNITS keys to key in
the parameters.
Parameter 0 ~ 9, the larger the number
the more stable the weight.
Filter parameter setting
LCD displays the last parameter setting
Filter parameter setting
Use ON/ZERO or UNITS keys to key
in the parameters.
Parameter 0 ~ 9, the larger the number,
the faster the filter response. Fast
response can lead to weight instability.

Setting is not
available for approval models.
5  skip 5d
6  skip 6d
7  skip 7d
8  skip 8d
9  skip 9d
Default setting = 0
Default setting = 5
ZSME300000298