Initializing The Frequency, Phase, And Position; Changing The Screen Size - Samsung PS-50P2HT Owner's Instructions Manual

Initializing the Frequency, Phase, and Position

➢
Preset to the PC mode by using the Source button.
1
Press the Menu button.
Result: The main menu is displayed.
2
Move the joystick up or down to select the SETUP menu and press
the joystick button.
Result: The Image Lock menu is selected.
3
Press the joystick button again.
Result: The options available in the IMAGE LOCK group are
displayed.
4
Move the joystick up or down to select the Auto Adjustment
menu.
Result: The Reset Freq./Phase/Position message is
displayed.
5
Press the joystick button again.
Result: The screen becomes black and return to original view
about a few seconds later.
6
When you have finished, press the Menu button repeatedly to
return to normal viewing.

Changing the Screen Size

➢
Preset to the PC mode by using the Source button.
1
Press the Menu button.
Result: The main menu is displayed.
2
Move the joystick up or down to select the SETUP menu and press
the joystick button.
3
Move the joystick up or down to select the Scale option.
4
Select the required option (Wide, 4:3) by moving the joystick left
or right repeatedly.
5
When you are satisfied with the settings, press the Menu button
repeatedly to return to normal viewing.
IMAGE LOCK
Frequency
Phase
Position
Auto Adjustment
Reset Freq./Phase/Position
Move Enter Exit
S E T U P
Image Lock
à ¨
Scale 4:3
Auto Power On On
Panel Lock Off
Miscellaneous
Move Select Exit
39
ENG