Samsung PS42P3S Owner's Instructions Manual page 13

Connecting Speakers
Connect the speaker audio cable to the external speaker output jack on the rear of the PDP matching
the "+" and "-" ends of the cable with the diagram on the PDP.
PS42P3S/PS50P3H
The speakers MUST have to a power
handling capability of 10 watts minimum
(impedance 8Ω).
When you connect the speaker wire to the
external speaker out connector, first bind
the speaker wire round the ferrite core to
secure it.
PS63P3H
Ferrite Cores
The ferrite cores are used to attenuate undesired signals.
When connecting cables, attach one of these ferrite cores to
the cable near the connector.
(continued)
Sub-woofer speaker
Sub-woofer speaker
13
ENG