Escort BELTRONICS GT-1 Quick Reference

Controls & Features
MARK
Magnet Mount
When connected to
Receptacle
ESCORT Live App, press
the MARK button to
report Live Police, Speed
Power
Camera, Red-Light
Press to turn GT-1
Camera, or simply any
on or off locations for future
references
Brightness (BRT)
Press to adjust display
brightness (Dark, Min,
Med, Max)
Sensitivity (SEN)
Press to adjust detector
sensitivity (Highway,
AutoScan, Auto NoX)
Mute Display Volume
Press to mute an alert. Alert Area Press and hold + or – to
When connected to ESCORT adjust volume
Display
Live App, press three times
• Bluetooth icon appears in grey
to lock out a false alert; press
when not paired to phone and
twice while receiving a
ESCORT Live App.
locked-out alert to unlock
• When paired to phone a
Bluetooth icon will appear on
display screen in blue.
• When connected to Escort Live,
the speed limit data and actual
speed will display on screen.
Important! Actual speed and live alerts will not be shown on your Beltronics GT-1 if your smart
phone does not have good GPS reception.
7
Settings & Preferences
Press and hold the MUTE and SEN buttons to access Programming. To exit Programming, simply wait a
few seconds without pressing a button. The unit will display Completed to confirm your selections.
Press MUTE to go from Press VOLUME + or – to change
one category to the next your setting within a category
User Mode Advanced* Access and customize all Settings and Preferences
Novice in Advanced Mode
NOTE: Switch back to Advance mode to view all Preferences
Pilot Scan Bar* Scanning Bar with Full Word
Full Word
Full Word: AutoScan, Auto NoX, or Highway
Display Color Copper*/Blue/Green/Red Set color to match your vehicle's dash display
Meter Mode Standard* Single band with bar graph of signal strength
Tech Single band with numeric frequency
Threat Multiple bands with bar graph of signal strengths
Basic Simple messages replace bands:
Caution (if traveling below cruise alert limit)
Slow Down (if traveling above cruise alert limit)
Tones Standard* Standard Beltronics alert tones
Mild Mild doorbell chime alert tones
AutoMute On* / Off Automatically reduces audio during alert
Language English*/Espanol Language for voice and text
Voice On* / Off Voice announcements
Band Enables Default* Default Settings for North America
Modified Customize the bands you want to monitor
8
8
Press SEN to go from one Press VOLUME + or – to change
band category to the next your setting within a category
X Band On* / Off
K Band On*/ Off Freq: 24.050-24.250 GHz
NOTE: When K Band is off, you can select separate segments of the band to turn on or off.
KN1 On* / Off Freq: 24.050 - 24.110 GHz
KN2 On* / Off Freq: 24.110 - 24.175 GHz
KN3 On* / Off Freq: 24.175 - 24.250 GHz
On* / Off
KN4 Freq: 23.950 - 24.050 GHz
Ka Band On* / Off Freq: 33.400-36.000 GHz
NOTE: When Ka Band is off, you can select separate segments of the band to turn on and off.
KaN1 On* / Off Freq: 33.392 - 33.704 GHz KaN6 On* / Off Freq: 34.806 - 35.166 GHz
On* / Off On* / Off
KaN2 Freq: 33.704 - 33.896 GHz KaN7 Freq: 35.143 - 35.383 GHz
KaN3 On* / Off Freq: 33.886 - 34.198 GHz KaN8 On* / Off Freq: 35.378 - 35.618 GHz
KaN4 On* / Off Freq: 34.184 - 34.592 GHz KaN9 On* / Off Freq: 35.595 - 35.835 GHz
KaN5 On* / Off Freq: 34.592 - 34.808 GHz KaN10 On* / Off Freq: 35.830 - 35.998 GHz
On* / Off
Laser
TSR On* / Off Automatically rejects traffic flow sensors-monitoring false alarms
Additional Preference options within ESCORT Live App when connected to Beltronics GT-1
Cruise Alert Off / 20-160 mph Offers double beep alert tones below specified speed
20 mph*
Speed Display On* Displays current speed
Off Displays battery voltage
English*/Metric
Units Units for distance and speed
*Default Setting
9
Contact Us
Notes for Settings & Preferences 866.468.0322 • Beltronics.com
For descriptions of features and functions
Beltronics USA, Inc.
available when connected to ESCORT Live, visit
5442 West Chester Road, West Chester OH 45069
Beltronics.com and download the Beltronics GT-1
Beltronics One Year Limited Warranty
Owner's Manual.
What this warranty covers: Beltronics USA, Inc. ("Beltronics") warrants
your Product against all defects in materials and workmanship.
For how long: One (1) year from the date of original purchase from an
To restore Beltronics GT-1 to its original factory authorized Beltronics dealer.
What we will do: If a breach of warranty occurs, Beltronics, at its
settings, press and hold MUTE and SEN while
discretion, will either repair or replace your Product free of charge.
What we will not do: Beltronics will not pay shipping charges that you
powering on detector. Restored message will
incur for sending your Product to us.
display, acknowledging the reset.
What you must do to maintain this warranty: Show original proof of
purchase or receipt from an authorized Beltronics dealer.
Warranty exclusions: This warranty does not apply to your product
Software Updates under any of the following conditions: 1. The serial number has been
removed or modified. 2. Your product has been subjected to misuse
Beltronics GT-1 is easily updated using our
or damage (including water damage, physical abuse, and/or improper
installation). 3. Your product has been modified in any way. 4. Your
exclusive detector software tools found on our
receipt or proof-of-purchase is from a non-authorized dealer or internet
web site. Firmware, or the operating software for
auction site, including E-bay, U-bid, or other non-authorized resellers.
the detector, can be updated using these tools. 5. You are not the original purchaser of the Product from an authorized
dealer or did not receive it as a gift from the original purchaser of the
Product from an authorized dealer.
To obtain service: 1. Contact Beltronics (1-800-341-2288) to obtain
In order to have access to these updates, please
a Return Authorization Number. 2. Properly pack your Product and
include: your name, complete return address, written description of
register your Beltronics GT-1 at www.Beltronics.
the problem with your Product, daytime telephone number, and a
com. Once registered, you will receive email
copy of the original proof of purchase or receipt. 3. Label the outside of
notifications that updates are now available the package clearly with your Return Authorization Number. Ship the
Product pre-paid (insured, for your protection) to: Beltronics USA, Inc.,
for your firmware. To handle your software 5442 West Chester Rd., West Chester, OH 45069.
LIMITATION OF WARRANTY: The obligations set forth above are
updates you need to connect your Beltronics GT-1
Beltronics' sole obligations and your exclusive remedy. Beltronics makes
no other express warranty. Any implied warranty of merchantability or
to a computer.
fitness for a particular purpose that may be applicable to the Product is
limited in duration to the duration of this warranty. Some States do not
You can connect Beltronics GT-1 to a computer via
allow limitations on how long an implied warranty lasts, so the above
Micro USB/USB A cable (not included). limitation may not apply to you. BELTRONICS SHALL NOT BE LIABLE
FOR CONSEQUENTIAL, SPECIAL OR INCIDENTAL DAMAGES INCLUDING,
WITHOUT LIMITATION, DAMAGES ARISING OUT OF THE USE, MISUSE OR
MOUNTING OF THE PRODUCT. Some States do not allow the exclusion
or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you. Beltronics is not responsible
for products lost in shipment between the owner and our service center.
Other legal rights: This warranty gives you specific legal rights, and you
ESCORT Live Compatible may also have other rights which vary from State to State.
©2018 Beltronics USA, Inc. Beltronics®, GT-1™, Escort Live!™, Defender®, AFR®,
TrueLock™, SmartShield®, SpecDisplay™, AutoSensitivity™ and ExpertMeter™ are
trademarks of Beltronics USA, Inc.. Manufactured in the Philippines. Features,
specifications and prices subject to change without notice.
FCC NOTE: Modifications not expressly approved by the manufacturer could
void the user's FCC granted authority to operate the equipment.
The Bluetooth® word mark and logos are registered trademarks
FCC ID: QL4G1S5
owned by Bluetooth SIG, Inc. and any use of such marks by ESCORT is
This device complies with part 15 of the FCC rules. Operation is subject to the
under license. following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received including interference that
may cause undesired operation.
10
Live life in the passing lane.
Open ➜
App Integration Provides Crowd-Sourced Alerts
Long range radar/laser detection.
Powerful Digital Signal Processor | Instantly clear voice alerts | Convenient magnetic mount system
(Note: Must be paired with ESCORT Live ticket protection App to receive posted speed limit data.)
Quick Reference