Selecting The Sound Mode (Depending On The Model) - Samsung PS-42Q91HP Owner's Instructions Manual

 Internal Mute: Off/On
If you want to hear the sound through separate speakers, cancel the internal amplifier.
➢
The VOL +, VOL -, S.MODE, and MUTE buttons do not operate when the Internal Mute is set to
On.
 Sound Select: Main/Sub
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
− Main: Used to listen to the sound of the main picture.
− Sub: Used to listen to the sound of the sub picture.
 Reset
If Game Mode is On, the Reset Sound function is activated. Selecting the Reset function after setting
the equalizer resets the equalizer setting to the factory defaults.
Selecting the Sound Mode
The DUAL I-II button displays/controls the processing and
output of the audio signal. When power is switched on, the
mode is automatically preset to either "DUAL-I" or "Stereo",
depending on the current transmission.
Type of broadcast
Regular broadcast
(Standard audio)
Regular + NICAM Mono
NICAM
NICAM Stereo
Stereo
NICAM DUAL-I/II
Regular broadcast
(Standard audio)
A2
Bilingual or DUAL-I/II
Stereo
Stereo
➢
 If the receiving conditions deteriorate, listening will be easier if the mode is set to Mono.
 If the stereo signal is weak and automatic switching occurs, switch to Mono.
 When receiving a mono sound in the AV mode, connect to the "AUDIO-L" input connector on the
panel (front or side). If the mono sound comes out only from left speaker, press the DUAL I-II
button.
(depending on the model)
On-screen indication
Mono (Normal use)
NICAM
NICAM
Stereo
NICAM NICAM
DUAL-1 DUAL-2
Mono (Normal use)
DUAL I
Stereo
(Forced mono)
English - 22
Mono
(Normal)
Mono
(Normal)
Mono
(Normal)
DUAL II
Mono