*Default setting
†If you don't have access to speed limit data, use Over Speed function to set threshold.
‡AutoPower works only with constant‐power ignitions.
To view serial number and software revision. Press Mark and Mute while powering on detector.
To restore PASSPORT MAX to its original factory settings, press and hold SEN and BRT while turning the
power on. A "Restored" message will display, acknowledging the reset.
Software Updates:
PASSPORT's red light and speed camera database is easily updated using our exclusive detector software
tools found on our web site. Firmware, or the operating
software for the detector, can also be updated using these tools. In order to have access to these
updates, you must register your PASSPORT at www.EscortRadar.com. Once registered, you will receive
email
notifications that updates are now available for your database or firmware. The PASSPORT 9500ix will
need to be powered up to use the software tools. If you have a laptop computer, you can take it out to
the vehicle to download the updates.
ESCORT Inc.
5440 West Chester Road
West Chester, OH 45069
Sales/Service 800.543.1608
www.escortinc.com
©2013 ESCORT Inc.
Features, specifications and prices subject to change without notice.
FCC Note: Modifications not expressly approved by the manufacturer could void the user's FCC granted
authority to operate the equipment.