Replacing The Headset Port; Procedure; Post-Requisites - Dell Inspiron 24 5000 All-in-One Service Manual

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Slide the headset port into its slot on the middle frame and align the screw hole on the headset port with the screw hole on the
display-assembly base.
2 Replace the screw (M3x5) that secures the headset-port board to the display-assembly base.

Post-requisites

1 Replace the side I/O-board.
2 Replace the rear-I/O bracket.
3 Replace the base panel.
4 Replace the system-board
5 Replace the back cover.
6 Replace the stand.
computer. After working inside your computer, follow the instructions in
shield.

Replacing the headset port

29
After working inside
www.dell.com/
Replacing the headset port 51