Turning The Tv On And Off; Memorizing The Channels; Viewing The Menus - Samsung PN42A400C2D Quick Setup Manual

Turning the TV On and Off

Press the POWER button on the remote control.
You can also use the POWER button on the TV.
➢
It may take a while for the picture to appear.

Viewing the Menus

1
With the power on, press the MENU button.
The main menu appears on the screen. Its left side
has five icons:
Picture, Sound, Channel, Setup, Input.
2
P ress the ▲ or ▼ button to select one of the icons.
Then press the ENTER button to access the icon's
sub-menu.
3
Press the EXIT button to exit.
➢
If you do not press the EXIT button, it takes
about one minute until the on-screen menu
disappears.
T V
Mode
Cell Light
Contrast
Brightness
Sharpness
Color
Tint G 50
More
▼
Move

Memorizing the Channels

Your TV can memorize and store all of the available channels
for both "off-air" (air) and cable channels. After the available
channels are memorized, use the CH
to scan through the channels. This eliminates the need to
change channels by entering the channel digits. There are
W.LINK
three steps for memorizing channels: selecting a broadcast
source, memorizing the channels (automatic) and adding and
deleting channels (Channel Lists).
Selecting the Video Signal-source
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or a Cable system).
1
Press the MENU button.
Press the ▲ or ▼ button to select Channel, then
press the ENTER button.
T V
Antenna
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
Move
Picture
: Standard ►
10
100
45
75
55
R 50
Enter
Exit
or CH button
W.LINK
Channel
: Air ►
►
►
►
►
►
►
Enter Return
English - 8
2
Press the ENTER button to select Antenna.
Press the ▲ or ▼ button to select Air or Cable,
then press the ENTER button.
Press the EXIT button to exit.
T V Channel
Antenna
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
Move
Storing Channels in Memory
(Automatic Method)
1
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then
press the ENTER button.
T V
Antenna
Auto Program
Clear Scrambled Channel
Channel List
Name
Fine Tune
Signal Strength
Move
2
Press the ▲ or ▼ button to select Auto Program,
then press the ENTER button.
● Air: Air antenna signal.
● Cable: Cable antenna signal.
● Auto: Air and Cable antenna
T V Auto Program
Select the antenna to execute the Auto
Program function.
Air
Cable
Auto
Move
3
Press the ▲ or ▼ button to select the antenna
connection, then press the ENTER button.
T V Auto Program
Selects a cable signal type for your location.
Analog
STD
HRC
IRC
Digital
STD
HRC
IRC
Move
: Air Air
Cable
Enter
Return
Channel
: Air ►
►
►
►
►
►
►
Enter
Return
signals.
Start
Start
Start
Enter Return
Start
Enter Return