Turning The Tv On And Off; Memorizing The Channels; Viewing The Menus And Displays; Displaying Status Information - Samsung PN50A550S1F Manual

Turning the TV On and Off

Press the POWER button on the remote control.
The TV will be turned on and you will be able to use its
features. You can also use the Power button on the front of
the TV
➢ If your TV isn't turned on when the Power button is
pressed: Press the TV button to check if the TV mode
has been chosen.

Viewing the Menus and Displays

Your TV has a simple, easy-to-use menu system that appears
on the screen. This system makes it convenient and fast to
use the TV's features.
The TV also displays the status of many features.
Viewing the Menus
1
With the power on, press the MENU button.
The main menu appears on the screen. The menu's
left side has icons: Picture, Sound, Channel,
Setup, Input, Application.
2
Press the ▲ or ▼ button to select one of the icons.
Then press the ENTER button to access the icon's
sub-menu.from the menu.
Press the EXIT button to exit.
➢ It takes about one minute until the on-screen menu
disappears.
Mode
Cell Light
Contrast
Brightness
Sharpness
Color
Tint (G/R)
Detailed Settings

Displaying Status Information

Press the INFO button on the remote control.
The TV will display the channel, the type of sound, and the
status of certain picture and sound settings.
➢
The information window automatically disappears
after a few seconds. Press the INFO button once to
manually close the window.
TV #1
Sun, Sep 3 1:45 pm
DTV Air M. Spillane's Mike Hammer
Dolby Digital
3-
Bonocrunch
: Standard
: 7
: 90
: 45
: 50
: 50
: G50/R50
480i 4:3 English
12:59 pm - 1:59 pm
English - 8

Memorizing the Channels

Selecting the Video Signal-source
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV(i.e., an air or a cable system).
1
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then
press the ENTER button.
2
Press the ENTER button to select Antenna.
Press the ▲ or ▼ button to select Air or Cable,
then press the ENTER button. Press the EXIT
button to exit.
Antenna
Auto Program
Channel List
Clear Scrambled Channel
Fine Tune
Signal Strength
Storing Channels in Memory (Automatic Method)
1
Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then
press the ENTER button.
2
Press the ▲ or ▼ button to select Auto Program,
then press the ENTER button.
Antenna
Auto Program
Channel List
Clear Scrambled Channel
Fine Tune
Signal Strength
3
Press the button to select an antenna connection,
then press the ENTER button.
➢
Air: Air antenna signal.
Cable: Cable antenna signal.
Auto: Air and Cable antenna signals.
Auto Program
Select the antennas to memorize.
Air
Cable
Auto
Move
: Air
Air
Cable
: Air
►
Start
Start
Start
Enter Return
Continued...