Installing The Display On The Wall Attachment Panel - Samsung PLASMA DISPLAY Owner's Instructions Manual

Teletext Feature

Installing the Display on the Wall Attachment Panel

➢
Refer to the correct installation guide according to your wall bracket.
Installation Notes
◆ Contact a technician for installing the wall bracket.
◆ Samsung Electronics is not responsible for any damages to the product or harm to customers when the
installation is done by the customer.
◆ This product is for installing on cement walls. The product may not stay in place when installed on plaster or
wood.
Components
◆ Only use the components and accessories shipped with the product.
Wall Bracket
Wall Bracket Angle Adjustment
➢
Adjust the bracket angle to -2
1 Fix the product to the wall bracket.
2 Hold the product at the top in the center and pull it forward
(direction of the arrow) to adjust the angle. (See the figure to
the right)
3 You can adjust the bracket angle between -2° and 15°.
(depending on the model)
The teletext pages are organized according to six categories:
Part
A
B
C
D
E
F
➢
Teletext information is often divided between several pages displayed in
sequence, which can be accessed by:
◆ Entering the page number
◆ Selecting a title in a list
◆ Selecting a coloured heading (FASTEXT system)
➢
Press the EXIT button to exit from the teletext display.
Hinge
1 Left: 1 Right: 1
o before installing it on the wall.
Contents
Selected page number.
Broadcasting channel identity.
Current page number or search indications.
Date and time.
Text.
Status information.
FASTEXT information.
Plastic Hanger: 4
Screw
English - 22
Accessories
Screw
: 4 Anchor : 11
Make sure to use the top center,
and not the left or the right side of
the product to adjust the angle.
: 11