Plug & Play Feature - Samsung PLASMA DISPLAY Owner's Instructions Manual

Plug & Play Feature
When the television is initially powered on, several basic customer settings proceed automatically and subsequently.
The following settings are available.
Plug & Play
Plug & Play
Language
English
Deutsch
Français
Nederlands
†
Move Enter
Plug & Play
Check antenna input.
OK
Enter
Plug & Play
Country
Belgium
France
Germany
Italy
†
Move Enter
Plug & Play
Auto Store
P 2 C 4
Start
Enter
Plug & Play
Hour Minute
Clock Set -- --
Enter
Plug & Play
Hour Minute
Clock Set 00 00
Adjust Move
Enjoy your viewing
TV
Plug & Play
Language : English
Time
Energy Saving : Standard
Blue Screen : Off
Melody : Off
PC
Screen Burn Protection
Move Enter
1 If the television is in standby mode, press the POWER ( ) button
on the remote control. The message to start Plug & Play is displayed.
2 The Language menu will automatically appear after several seconds.
Select the appropriate language by pressing the ... or † button.
3
Press the ENTER (
of the antenna is displayed.
Skip
4 Make sure that the antenna is connected to the TV.
Press the ENTER (
Select your country or area by pressing the ... or † button.
5
Press the ENTER (
Skip
6 To start channel store, press the ENTER (
The search will end automatically. The TV will begin memorizing all of the
available channels.
Press the ENTER (
Press the œ or √ button to select the hour or minute.
7
Skip
Set these by pressing the ... or † button.
➢
You can enter the hours or minutes by using the numeric buttons on the
remote control.
63 MHz
0 %
8 Press the ENTER (
The message "Enjoy your viewing" is displayed.
Skip
Skip
Enter
If you want to reset this feature ...
1 Press the MENU (
Setup
√
Press the ... or † button to select Setup, then press the ENTER (
2
√
√
button.
√
√
√
3 Press the ENTER (
√
The message to start Plug & Play is displayed.
√
Return
) button. The message to check the connected status
) button. The Country menu is displayed.
) button. The menu to select channels is displayed.
) button to set the clock.
) button to confirm your setting.
) button to display the menu.
) button again to select Plug & Play.
English - 8
) button.
)