Pentair DigiTrace RTD50CS Installation Instructions

RTD TEMPERATURE SENSOR FOR TEMPERATURE MEASUREMENT TO 400°F (204°C)

INSTALLATION INSTRUCTIONS

APPROVALS
SPECIFICATIONS
Sensor
Housing 316 stainless steel
Dimensions
Sensing area 1½
Accuracy
Range
Resistance
WARNING:
This component is an electrical device. It must be installed
correctly to ensure proper operation and to prevent shock or
fire. Read these important warnings and carefully follow all the
THERMAL MANAGEMENT SOLUTIONS
RTD50CS
α
installation instructions. Component approvals and performance
are based on the use of s pecified parts only. Do not use substitute
parts or vinyl electrical tape to make connections.
EN-DigiTraceRTD50CS-IM-H58856 01/13
DESCRIPTION
The RTD50CS is a 50-foot three-wire platinum RTD (resistance
temperature detector) used with monitoring and control systems,
such as our DigiTrace C910 or ACCS-30 controllers.
The RTD50CS can be installed directly to the controller using the
supplied 1/2-inch conduit fitting or to an RTD junction box where
RTD extension wire is used.
TOOLS REQUIRED
ADDITIONAL MATERIALS REQUIRED
KIT CONTENTS
Qty Description
1 RTD temperature sensor
Extension Wires
Wire size 20 AWG, stranded tinned copper
(each of 3)
Wire insulation
rating
Length
lead wire
Outer shield Stainless steel flexible armor
Maximum exposure
temperature
Conduit bushing ½ in NPT
1 / 2