Setting - ABB REC 561 User Manual

ABB Network Partner AB
Version 1.0-00

4 Setting

I/O system configuration
You can set the input names for binary input and binary output modules
(BIM, BOM, and IOM) from the CAP 531 configuration tool. For REL
531, you can set the names from the SMS or the built-in MMI.
The binary input module (BIM) has a suppression function that blocks
oscillating inputs on the module. You can set the oscillation blocking/
release frequencies from the SMS or from the built-in MMI.
The appendix contains the parameters and their setting ranges for BIM,
BOM, and IOM.
Refer to the document Direct Current Measuring Unit (1MRK 580 154-
XEN) to set the mA input module.
1MRK 580 190-XEN
Page 4 - 21