DeWalt DCM5713 Original Instructions Manual

DeWalt DCM5713 Original Instructions Manual

Xr flexvolt li-ion
Hide thumbs Also See for DCM5713:

Advertisement

DCM5713
ORIGINAL INSTRUCTIONS
Final page size: A5 (148mm x 210mm)

Advertisement

Table of Contents
loading

Summary of Contents for DeWalt DCM5713

  • Page 1 DCM5713 ORIGINAL INSTRUCTIONS Final page size: A5 (148mm x 210mm)
  • Page 2 English (original instructions) Copyright D WALT...
  • Page 3 Fig. A Fig. B...
  • Page 4 Fig. C Fig. D Fig. E Fig. F 610 mm Fig. G Fig. H...
  • Page 5 Fig. I Fig. J Fig. K Fig. L Fig. M...
  • Page 6: Technical Data

    Weight English GRASS TRIMMER DCM5713 Congratulations! WARNING: The declared vibration emission You have chosen a D WALT tool. Years of experience, thorough level represents the main applications of the tool. However product development and innovation make D WALT one of the if the tool is used for different applications, with different most reliable partners for professional power tool users.
  • Page 7 NOTICE: Indicates a practice not related to Grass Trimmer personal injury which, if not avoided, may result in DCM5713 property damage. WALT declares that these products described under Denotes risk of electric shock. Technical Data are in compliance with: 2006/42/EC, EN60335-1:2012 + A11:2014, EN50636-2-91:2014.
  • Page 8: Maintenance And Storage

    English b ) Avoid using the machine in bad weather conditions • Do not work on steep slopes. Work across the face of slopes, especially when there is a risk of lightning. not up and down. c ) Use the machine only in daylight or good artificial light. •...
  • Page 9: Electrical Safety

    English • Injuries caused by touching any rotating/moving parts. • Before using charger, read all instructions and cautionary markings on charger, battery pack, and product using • Injuries caused when changing any parts, blades battery pack. or accessories. • Injuries caused by prolonged use of a tool. When using any WARNING: tool for prolonged periods ensure you take regular breaks.
  • Page 10 English Do not operate charger if it has received a sharp blow, hot/Cold Pack Delay • been dropped, or otherwise damaged in any way. Take it When the charger detects a battery pack that is too hot or too to an authorised service centre. cold, it automatically starts a Hot/Cold Pack Delay, suspending •...
  • Page 11 English Do not charge or use battery in explosive atmospheres, Transportation • such as in the presence of flammable liquids, gases or WARNING: dust. Inserting or removing the battery from the charger may Fire hazard. Transporting ignite the dust or fumes. batteries can possibly cause fire if the battery terminals Never force battery pack into charger.
  • Page 12: Package Contents

    English certain shipping regulations that are imposed upon the higher Watt hour batteries. Do not incinerate the battery pack. For example, the Transport Example of Use and Transport Label Marking Wh rating might indicate USE (without transport cap). Example: Wh rating 3 x 36 Wh, meaning 3 indicates 108 Wh (1 battery with 108 Wh).
  • Page 13 English To Install the Battery Pack into the Tool 1. Align the battery pack  13  with the rails inside the tool (Fig. B). Keep bystanders away. 2. Slide it into the tool until the battery pack is firmly seated and ensure that you hear the lock snap into place. To Remove the Battery Pack from the Tool Directive 2000/14/EC guaranteed 1.
  • Page 14 WALT replacement line Model No. DT20650 (2 mm), and your feet as shown in Figure F. DT20651 (2 mm), DT20652 (2.5 mm). • For optimal performance, use Dewalt DT20650/51. D WALT WARNING: DT20652 can also be use but may degrade runtime of the Keep the rotating string roughly trimmer.
  • Page 15 English Reloading the Cutting Line (Fig. G, H) 4. The line cutter on the edge of the guard can dull over time. It is recommended you periodically touch-up the sharpness WARNING: of the blade with a file. To reduce the risk of serious The charger and battery pack are not serviceable.
  • Page 16 English WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic parts of the tool. These chemicals may weaken the materials used in these parts. Use a cloth dampened only with water and mild soap. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid.
  • Page 17 English...
  • Page 18 English...
  • Page 19 English...
  • Page 20 Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com en Luxemburg 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)

This manual is also suitable for:

Xr flex volt dcm5713Xr flex volt dcm5713x1

Table of Contents