BN68-448D-03Eng
10/29/03 1:09 AM
Changing the Picture Standard
POWER
TV
P.MODE
Adjusting the Custom Picture
English-24
Page 24
You can select the type of picture which best corresponds to your
viewing requirements.
1
Press the MENU button.
Result:
2
Press the
Result:
3
Press the ENTER
Result:
4
Press the ENTER
Select the required picture effect by pressing the
repeatedly. The following picture effects are available:
SELECT
Your set has several settings which allow you to control picture quality.
1
Press the MENU button.
Result:
2
Press the
Result:
3
Press the ENTER
4
Press
ENTER
5
Select the option (Contrast, Brightness, Sharpness, Colour or
Tint-NTSC only) to be adjusted by pressing the
Press the ENTER
Result:
6
Press the ➛ or ❿ button to reach the required setting.
7
When you are satisfied with the setting, press the MENU button to
return to the previous menu or press the EXIT button to return to
normal viewing.
The main menu is displayed.
or ❷ button to select Picture.
The options available in the Picture group are displayed.
or ❿ button.
The Picture Mode is selected.
or ❿ button again.
Custom - Dynamic - Standard - Movie
You can also display simply by pressing the P.MODE
(Picture Mode) button.
The main menu is displayed.
or ❷ button to select Picture.
The options available in the Picture group are displayed.
or ❿ button.
or ❷ button to select Custom Picture and press the
or ❿button.
or ❿ button.
The horizontal bar is displayed.
or ❷ button
or ❷ button.