Lexmark X950 Quick Reference page 22

Note: Make sure all paper fragments are removed.
Paper jam in door H
1
Open door H.
Note: Door H is located between the finisher exit bins.
2
Firmly grasp the jammed paper on each side, and then gently pull
it out.
Note: Make sure all paper fragments are removed.
3
Close door H.
4
If necessary, touch Continue from the printer control panel.
Paper jam in door G
1
Open door G.
Area Cover, knob, or handle name
1 Cover G1
2 Cover G2
3 Knob G3
4 Cover G4
22
Area Cover, knob, or handle name
5 Cover G7
6 Knob G8
7 Handle G9
2
Lift cover G1 lever.
3
Firmly grasp any jammed paper, and then gently pull it out.
Note: Make sure to remove all paper fragments after gently
pulling out any jammed paper inside door G.
4
Move cover G2 to the right, and then remove any jammed paper.
Note: If the paper is jammed in the rollers, then rotate knob G3
counterclockwise.
5 Move cover G4 down, and then remove any jammed paper.
6 Move cover G7 to the left, and then remove any jammed paper.
7
Pull handle G9 until the tray is completely open.
1
2
3
4
5
6
7