Before Installation - Fisher & Paykel ACTIVESMART RS90A Installation Manual

IMPORTANT!
Ensure your refrigerator is not exposed to any heat generating appliance eg cooktop, oven or dishwasher.
● ●
The refrigerator has front and rear rollers for moving the refrigerator forward and backward. Do not move the refrigerator sideways to avoid damaging the rollers or floor covering/surface.
● ●
The refrigerator must be installed by a qualified installer, or Fisher & Paykel trained and supported service technician to avoid faulty electrical connection and water leaks.
● ●
All connections for water, electrical power and grounding must comply with local codes and ordinances and be made by licensed personnel when required.
● ●
Avoid installation of the refrigerator/s under a ground fault circuit interrupter (GFCI).
● ●
Ensure the refrigerator is installed properly. Improper installation that results in refrigerator failure is not covered under the refrigerator warranty.
● ●
Check the installation location
Check the cabinetry
Check the dimensions of the cabinetry (width, depth, height, floor level, finished
● ●
alcove returns).
Ensure that the ventilation openings in the cabinetry are clear of obstruction.
● ●
For integrated installation, a finished return of solid material is required across the top
● ●
and sides of the new or existing alcove.
Check the power supply connection
Ensure that there is a separate power outlet for each refrigerator.
● ●
Avoid sharing the power point with other appliances to prevent accidental switching off
● ●
of the refrigerator.
For power requirements, refer to the information on the serial plate. his is located at the
● ●
front right-hand side of the drawer when open.
Ensure your refrigerator is properly grounded (earthed).
● ●
Connect the refrigerator to the electrical supply (230 VAC, 50 Hz) with fitted plug and lead.
● ●
We recommend to use an isolating switch that is easily accessible to the user after the
● ●
refrigerator is installed.
Follow the National Electrical Code and all local codes and ordinances when installing
● ●
this refrigerator.
Check the water supply connection (for Ice & Water models only)
Your product must be installed by a qualified refrigerator installer as incorrect plumbing
● ●
can lead to water leaks.
Fisher & Paykel is not liable for damage (including water damage) caused by faulty
● ●
installation or plumbing.
Check your refrigerator
Ensure that your refrigerator is the correct model as per your order.
● ●
Ensure that the packaging is not damaged upon delivery.
● ●
Check that the components and install kits are complete.
● ●
12
8

BEFORE INSTALLATION

Prepare the door panel set
The refrigerator does not include a door panel set.
● ●
Custom door panels are designed only for non-Water dispensing models.
● ●
For a custom integrated design of non-Water dispensing models, the customer should
● ●
supply their own custom door panel set.
– All the hardware required to mount the door panel sets to the refrigerator doors is
supplied with the refrigerator.
Door panel sets are available through your Fisher & Paykel dealer.
● ●
– Fisher & Paykel door panel sets are available (Stainless steel door panels)
– Model numbers: RD90U or RD90.
Handle sets are optional for custom door panels and can also be purchased through your
● ●
Fisher & Paykel dealer.