Samsung FP-T6374 Owner's Instructions Manual page 69

Zooming-In
1 After switching the mode to WISELINK, select the memory device that you have
inserted. (Refer to page 63)
2 Press the ◄ or ► button to select Photo, then press the ENTER button.
JPEG files and existing folders are displayed.
3 Press the ▲/▼/◄/► buttons to select a file, then press the ENTER button.
Pressing the button over a photo icon shows the currently selected photo in full
screen.
4 Press the INFO button to display the option (Slide Show, Rotate, Zoom, List).
Press the ▲ or ▼ button to select Zoom, then press the ENTER button.
Each time the ENTER button is pressed, the photo size increases.
(X1 → X2 → X4)
• X1: Restore the photo to its original size.
• X2: Zoom-in to the photo X2.
• X4: Zoom-in to the photo X4.
To move the enlarged photo image up/down/left/right, press the ▲/▼/◄/►
buttons.
To exit WISELINK mode, press the WISELINK button on the remote control.
Zoom function information icon
Icon Current OSD
Zoom (x2)
Zoom (x4)
Zoom (x1)
Pan Down
Pan Up
Pan Right
Pan Left
Pan Down (END)
Pan Up (END)
Pan Right (END)
Pan Left (END)
Press the WISELINK button on the remote control to turn on the WISELINK mode.
(Displayed at the top left of the screen)
Function
Zoom-in to a photo x2.
Zoom-in to a photo x4.
Restore a photo to its original size.
Pan down to view the lower part of a zoomed-in photo.
Pan up to view the upper part of a zoomed-in photo.
Pan right to view the right side of a zoomed-in photo.
Pan left to view the left side of a zoomed-in photo.
Pan to the bottom of a zoomed-in photo
Pan to the top of a zoomed-in photo.
Pan to the right-most part of a zoomed-in photo.
Pan to the left-most part of a zoomed-in photo.
English - 69
.