Table of Contents
Advertisement
Quick Links
User Manual
F32TU87*
The colour and the appearance may differ depending on the product, and the specifications are subject
to change without prior notice to improve the performance.
The contents of this manual are subject to change without notice to improve quality.
© Samsung
Samsung owns the copyright for this manual.
Use or reproduction of this manual in parts or entirety without the authorization of Samsung is
prohibited.
Trademarks other than that of Samsung are owned by their respective owners.
An administration fee may be charged in the following situations:
(a) An engineer is called out at your request, but it is found that the product has no defect (i.e.,
where the user manual has not been read).
(b) You bring the unit to a repair centre, but it is found that the product has no defect (i.e., where the
user manual has not been read).
You will be informed of the administration fee amount before a technician visits.
Advertisement
Table of Contents
Related Manuals for Samsung LF32TU870VRXXU
Summary of Contents for Samsung LF32TU870VRXXU
- Page 1 The contents of this manual are subject to change without notice to improve quality. © Samsung Samsung owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung is prohibited. Trademarks other than that of Samsung are owned by their respective owners.
-
Page 2: Table Of Contents
Table of contents Before Using the Product Connecting and Using a Source Device Menu Safety Precautions Read below before connecting the product. Picture Electricity and Safety Ports PIP/PBP Installation Operation Connecting and Using a PC OnScreen Display Connection Using the HDMI Cable Cleaning System Connection Using an HDMI-DVI Cable... - Page 3 Table of contents Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Centre Product diagnosis (Screen issue) Checking the Resolution and Frequency Check the following. Q & A Specifications General Standard Signal Mode Table Appendix Responsibility for the Pay Service (Cost to...
-
Page 4: Before Using The Product
DC voltage: Rated voltage marked • Only use the power cord provided with your product by Samsung. Do not use the power cord with literature concerning operation and with this symbol is DC voltage. other products. -
Page 5: Installation
Do not expose the product to direct sunlight, heat, or a hot object such as a stove. ‒ Be sure to consult Samsung Customer Service Centre if you want to install the product at such a ‒ The product lifespan may be reduced or a fire may result. -
Page 6: Operation
‒ Be sure to power off the product and disconnect the power cord when water or other foreign Warning substances have entered the product. Then contact Samsung Customer Service Centre. • There is a high voltage inside the product. Never disassemble, repair or modify the product •... -
Page 7: Cleaning
― Contact your nearest Samsung Customer Service Centre if you want to clean the inside of the product • Disconnect the power cord from the power socket if you do not plan on using the product for an (Service fee will be charged.) -
Page 8: Correct Posture To Use The Product
Correct posture to use the product Use the product in the correct posture as follows: • Straighten your back. • Allow a distance of 45 to 50cm between your eye and the screen, and look slightly downward at the screen. •... -
Page 9: Preparations
Chapter 02 Preparations Installation Attaching the Stand Put the stand base onto the stand neck as the direction Place the protective Styrofoam (cushion) included in shown in the figure. Tightly fasten the connecting the package on the floor and place the product facing screw at the bottom of the stand base. -
Page 10: Removing The Stand
Removing the Stand Precautions for moving the product ― Before removing the stand from the product, place the product on a flat and stable surface with the screen facing down. • Hold the lower corners or edges of the • Do not directly apply pressure on the screen. -
Page 11: Checking The Space Around The Product
Checking the space around the product Adjusting the Product Tilt and Height ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without Make sure to have enough space for ventilation when placing the product. An internal temperature rise notice to improve quality. -
Page 12: Rotating The Product
Rotating the Product Anti-theft Lock ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without ― An anti-theft lock allows you to use the product securely even in public places. notice to improve quality. ―... -
Page 13: Wall Mount Kit Specifications (Vesa)
If you install the product on a slanted wall, it may fall and result in severe personal injury. Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are provided. -
Page 14: Control Panel
Control Panel Parts Description JOG Button Multi directional button that helps navigate. This LED is power status indicator. ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without ― You can select the power LED operation to be enabled or disabled on Power LED notice to improve quality. -
Page 15: Direct Key Guide
Direct Key Guide ― On the Direct Key Guide screen, the following menu options appear when the product screen is switched on or the input source is changed. ― The Direct Key Guide screen shows if Eye Saver Mode is enabled. ( : On, : Off) Eye Saver Mode... -
Page 16: Connecting And Using A Source Device
Chapter 03 Connecting and Using a Source Device Read below before connecting the product. Before connecting the product, check the shapes of both ports of the supplied signal cables and the shapes and locations of the ports on the product and external device. Before connecting the product, make sure you remove the power cables from both the product and the external device to prevent damage to the product due to a short circuit or over current. -
Page 17: Ports
Ports Port Description HDMI IN Connects to a source device using an HDMI cable or HDMI-DVI cable. DP IN Connects to a PC using a DP cable. ― The functions available may vary depending on the product model. The colour and shape of parts may differ from what is shown. -
Page 18: Connecting And Using A Pc
― When connecting an HDMI cable, use the cable that came with the components of the product. If you use an HDMI cable other than provided by Samsung, the image quality may be degraded. ― If using an HDMI to USB Type-C cable, connect the HDMI cable to the monitor. -
Page 19: Connection Using A Thunderbolt™ 3 / 4 Cable Or Usb Type-C Cable
Before using the product, update the BIOS programme, Thunderbolt firmware, and Thunderbolt or USB Type-C specification. Otherwise, your devices may be damaged. A Samsung branded cable is software of your PC to their latest versions by visiting the official website of your PC. -
Page 20: Connecting The Dual Display (Daisy Chain)
Connecting the Dual display (daisy chain) Connecting to headphones or earphones ― The headphones or earphones jack supports only the 3 conductor tip-ring-sleeve (TRS) type. Monitor 1 Monitor 2 Connecting the Power Dual display (daisy chain) support depends on your PC and the connected Thunderbolt™ 3 / 4 cable. The Thunderbolt™... -
Page 21: Connecting The Product To A Pc As A Usb Hub
Connecting the Product to a PC as a USB HUB Use the product as a hub to connect the PC to a variety of devices and/or networks. To establish a LAN connection, use a Thunderbolt™ 3 / 4 cable: , port or USB Type-C cable: port. -
Page 22: Tidying Up The Connected Cables
Tidying Up the Connected Cables Tilt the display, as shown in the figure. Rotate the product to the highest vertical position. Connect the corresponding cables. Put both cables in the cable holder on the stand (HOLDER-STAND Rotate the product to the horizontal position. Assembly is complete. -
Page 23: Setting Optimum Resolution
Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language on information message and change the resolution on your PC to the optimum setting. -
Page 24: Menu
Chapter 04 Menu Function Key Guide → ― The functions available may vary depending on the product model. The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Picture Description Picture Mode... - Page 25 Description mode When the external input is connected through HDMI, DP, Thunderbolt™ 3/USB-C and PC/AV Mode is set to AV, Picture Mode has four automatic picture settings (Dynamic, Standard, Movie and Custom) that are preset at the factory. You can activate either Dynamic, Standard, Movie Custom.
- Page 26 Description Sharpness Make the outline of objects more clear or blurry. (Range: 0~100) A higher value will make the outline of objects clearer. ― This option is not available when Picture Mode is in Cinema Dynamic Contrast mode. ― This menu is not available when Game Mode is enabled.
- Page 27 Description Response Time Accelerate the panel response rate to make video appear more vivid and natural. ― Use Standard mode when not playing a video or game. ― This menu is not available when PIP/PBP Mode is enabled. Game Mode Configure the product screen settings for game mode.
-
Page 28: Pip/Pbp
PIP/PBP Description PIP/PBP Mode Turn PIP/PBP Mode on or off. Mode Type Select the size and aspect ratio of the sub-screen. • 8:9 | 8:9 Screen Size Select sub-screen size. • ― This option is available when Mode Type is set to PIP. Screen Position Select the position of the sub-screen from the available options. -
Page 29: Onscreen Display
Description Source Select the source for each screen. Screen Ratio Choose the size and aspect ratio of the picture displayed on screen. mode • Auto Wide mode • 16:9 Screen Fit ― The function may not be supported depending on the ports provided with the product. ―... -
Page 30: System
System Description DisplayPort Ver. Select the DisplayPort version to use. ― Incorrect settings may cause the screen to go blank. If this occurs, check the device specifications. Input Port Ver. Select an HDMI version. ― The supportable device and resolution may differ depending on its version. ―... - Page 31 Description Off Timer Plus Off Timer • Timer: Turn on Off Timer mode. • Turn Off After: The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of hours.
-
Page 32: Support
Software Update Update software using an update file on a USB device. Save the update file (in .bin format) that you downloaded from the Samsung website (http://www.samsung.com/sec) to a USB device. Connect the USB device to the port on the monitor. -
Page 33: Installing The Software
Installing the Software Easy Setting Box Driver Installation To install the latest version of the product driver, download it from the Samsung website (http://www. samsung.com). ― You can set the optimum resolution and frequency for this product by installing the corresponding drivers. -
Page 34: Troubleshooting Guide
Check the following. Customer Service Centre Installation issue ― Before calling Samsung Customer Service Centre, test your product as follows. If the problem persists, contact Samsung Customer Service Centre. The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connectors are locked. - Page 35 The message Check the cable connection and the settings of the source device. appears. There is no image on the screen and the power LED blinks every 0.5 to 1 second. • Check that the cable is properly connected to the product. •...
-
Page 36: Q & A
Q & A ― Refer to the user manual for your PC or graphics card for further instructions on adjustment. How can I change the frequency? Set the frequency on your graphics card. • Windows 7: Go to Control Panel → Appearance and Personalization → Display → Screen Resolution → Advanced settings → Monitor, and adjust Screen Refresh Rate under Monitor settings. •... -
Page 37: Specifications
Refer to the label at the back of the product as the standard • The specifications are subject to change without notice to improve quality. voltage can vary in different countries. • For detailed device specifications, visit the Samsung website. Signal connectors HDMI, DisplayPort, Thunderbolt™ 3 • (Europe only) -
Page 38: Standard Signal Mode Table
Standard Signal Mode Table Model Name F32TU87* Synchronization (PANEL Spec) Horizontal Frequency 30 ~ 135 kHz Vertical Frequency 50 ~ 75 Hz (HDMI) 30 ~ 75 Hz (DisplayPort, Thunderbolt™ 3) Resolution Optimum Resolution 3840 x 2160 @ 60 Hz Maximum Resolution 3840 x 2160 @ 60 Hz If a signal that belongs to the following standard signal modes is transmitted from your PC, the screen will automatically be adjusted. - Page 39 Port Horizontal Frequency Vertical Frequency Pixel Clock Sync Polarity Resolution (kHz) (Hz) (MHz) (H/V) HDMI IN DP IN VESA, 1280 x 1024 63.981 60.020 108.000 VESA, 1280 x 1024 79.976 75.025 135.000 VESA, 1440 x 900 55.935 59.887 106.500 VESA, 1600 x 900 60.000 60.000 108.000...
-
Page 40: Appendix
• Use of supplies or separately sold product unspecified by Samsung. • Repair from a person besides an engineer of outsourcing service company or partner of Samsung Not a product defect Electronics Co., Ltd. •... -
Page 41: Weee
WEEE Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.