Using The Photo (Jpeg) List - Samsung FP-T6374 Owner's Instructions Manual

Using the Photo (JPEG) List

You can play back the JPEG files saved on a memory device in various ways.
1 After switching the mode to WISELINK, select the memory device that you have
inserted. (Refer to page 63)
2 Press the ◄ or ► button to select Photo, then press the ENTER button.
JPEG files and existing folders are displayed.
3 Press the ▲/▼/◄/► buttons to select a file, then press the ENTER button.
➢ Pressing the button over a photo icon displays the currently selected photo
in full screen. However, JPEG files smaller than 640x480 pixels are zoomed-
in at 4 times their original size. (e.g. If a photo's original size is 200x200
pixels, it is displayed at 800x800 pixels.)
➢ Press the INFO button and select View to view a photo image at its original
size.
Pressing the button over a folder icon shows the JPEG files included in the
➢
folder.
While a full screen is displayed, ◄ or ► buttons will let you see another
➢
photo image in the same folder.
➢ Press the PLAY/PAUSE button when a Photo icon is selected to start a Slide
Show.
To exit WISELINK mode, press the WISELINK button on the remote control.
Moving to a photo may take a few seconds because the file needs to be
➢
loaded. At this point, the icon will appear.
This menu shows only the files whose extension is jpeg (or jpg).
➢
Files with other formats such as gif or tiff will not be displayed.
➢ Fifteen thumbnail photos are displayed per page.
The thumbnails are numbered from left to right and from top to bottom, from
➢
1 to 15.
Folders are displayed first and they are followed by all JPEG files in the
➢
current folder. The folders and JPEG files are sorted in alphabetical order.
➢ If the photo is displayed in full screen, you can zoom in and out or rotate the
photo on the screen. (Refer to pages 68~69)
➢ It takes a while to show JPEG files as thumbnail images.
WISELINK for this product supports JPEG files up to 8K x 8K pixels. For
➢
progressive JPEG files or files whose size exceeds 8MB, the photo will be
displayed as a thumbnail only. When trying to view a progressive JPEG file,
the message Not supported mode will appear. When trying to view a file
exceeding 8MB, the message This file is too large to decode will appear.
The higher the image resolution advances, the longer the display time takes.
➢
➢ You cannot decode images beyond a horizontal resolution of 5000.
➢ You cannot decode images beyond a vertical resolution of 4000.
Press the WISELINK button on the remote control to turn on the WISELINK mode.
English - 64