Husqvarna MS 610 G Operator's Manual page 17

Table of Contents

Advertisement

Available languages

Available languages

1. Turn the power switch (10) to the OFF position to
stop the machine.
To cut with throttle (MS 610 G)
1. Let the engine warm up for several minutes with
engine throttle at idle speed (minimum).
271 - 002 - 12.06.2018
10
2. Open the engine throttle full open.
3. Start sawing, all sawing is done at full throttle.
To cut with the cutting arm handle
1. Hold the handle and lower the blade to cut the work
piece.
2. Release the force from the handle to stop the
cutting.
To cut with plunge cutting (MS 610 G)
The cutting arm is spring loaded and adjustable up and
down.
17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ms 610

Table of Contents