Page 1
Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Contacte con SAMSUNG WORLDWIDE Si tiene alguna pregunta o comentario referente a nuestros productos, por favor contacte con nuestro Servicio de Atención al Cliente.
Page 2
(SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and in Canada on SAMSUNG products purchased in the United States, for the warranty period originally specified, and to the Original Purchaser only.
Contents General Information ■ List of Features ...2 ■ Accessories ...2 ■ Viewing the Control Panel ...3 ■ Viewing the Connection Panel ...4 ■ Remote Control ...5 ■ Installing Batteries in the Remote Control ...6 Connections ■ Connecting VHF and UHF Antennas ...6 ■...
General Information List of Features • Adjustable picture settings that can be stored in the TV’s memory. • Automatic timer to turn the TV on and off. • A special sleep timer. • Excellent Digital Interface & Networking : With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Cable Box/Satellite receiver (Set-Top Box) needed.
Viewing the Control Panel Buttons on the Lower-Right Part of the Panel The buttons on the lower-right panel control your TV’s basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. The product color and shape may vary depending on the model. ➣...
Viewing the Connection Panel Use the connection panel jacks to connect A/V components that will be connected continuously, such as DVD players or a VCR. For more information on connecting equipment, see pages 6~11. [TV Rear Panel] The product color and shape may vary depending on the model. ➣...
# Use these buttons in the DMA, WISELINK and Anynet + modes. : This remote can be used to control recording on Samsung recorders with the Anynet + feature) ON/OFF Press to backlight the buttons on the remote. This function is convenient for using at night or when the room is dark.
Installing Batteries in the Remote Control Lift the cover at the back of the remote control upward as shown in the figure. Install two AAA size batteries. Make sure to match the “+” and “–” ends of the batteries with the diagram inside the ➣...
Connecting Cable TV To connect to a cable TV system, follow the instructions below. Cable without a Cable Box Plug the incoming cable into the ANT IN terminal on the back of the TV. Because this TV is cable-ready, you do not need a cable box to view ➣...
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via HDMI This connection can only be made if there is an HDMI Output connector on the external device. Connect an HDMI Cable DVD Player or Cable Box/Satellite receiver between the HDMI IN (1, 2 or 3) jack on the TV and the HDMI jack on the DVD Player or...
Connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box) via Component cables The rear panel jacks on your TV make it easy to connect a DVD Player or Cable Box/Satellite receiver (Set-Top Box) to your TV. Connect a Component Cable between the COMPONENT IN (1 or 2) [Y, P...
VCR is stereo, you must connect two cables. S-Video Connection Your Samsung TV can be connected to an S-Video jack on a VCR. (This connection delivers a better picture as compared to a standard VCR.) To begin, follow steps 1–3 in the previous...
Connecting a Digital Audio System The rear panel jacks on your TV make it easy to connect a Digital Audio System (Home theater/Receiver) to your TV. Connect an Optical Cable between the “DIGITAL AUDIO OUT (OPTICAL)” jacks on the TV and the Digital Audio Input jacks on the Digital Audio System.
Operation Turning the TV On and Off Press the POWER button on the remote control. You can also use the POWER button on the TV. Plug & Play Feature When the TV is initially powered on, basic settings proceed automatically and subsequently.
Press the ENTER button. Press the ▲ or ▼ button to select “Auto”, then Press the ENTER The message “Set to daylight saving time.” is displayed. If you select “Manual”, “Set current date and time” is displayed. (See page 45) Press the ▲...
Using the Button button is used to select stations that broadcast a digital signal. For example, for Channel 7-1, press 7, then HD indicates the TV is receiving a Digital High Definition signal. ➣ SD indicates the TV is receiving a Standard Definition signal. For quick channel change, press the number buttons, then press the ➣...
Using the TOOLS Button You can use the TOOLS button to select your frequently used functions quickly and easily. The “TOOLS” menu changes depending on which external input mode you are viewing. Press the TOOLS button. The “TOOLS” menu will appear. Press the ▲...
Page 18
Storing Channels in Memory (Automatic Method) Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Auto Program”, then press the ENTER button.
To Select the Source Use to select TV or other external input sources such as DVD players or Cable Box/Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice. Press the MENU button to display the menu. Press the ▲...
Picture Control Changing the Picture Standard You can select the type of picture which best corresponds to your viewing requirements. Press the MENU button to display the menu. Press the ENTER button to select “Picture”. Press the ENTER button to select “Mode”. Press the ▲ or ▼ button to select “Dynamic”, “Standard”...
Adjusting the Detailed Settings Samsung’s new TVs allow you to make even more precise picture settings than previous models. See below to adjust detailed picture settings. Activating Detailed Settings Press the MENU button to display the menu. Press the ENTER button to select “Picture”.
Page 22
Adjusting the Gamma You can adjust the Primary Color (Red, Green, Blue) Intensity. (-3 ~ +3) Press the ▲ or ▼ button to select “Gamma”, then press the ENTER button. Press the ◄ or ► button to decrease or increase the value. Press the ENTER button.
Page 23
Adjusting the White Balance You can adjust the color temperature for more natural picture colors. 17. Press the ▲ or ▼ button to select “White Balance”, then press the ENTER button. 18. Select the required option by pressing the ▲ or ▼ button, then press the ENTER button.
Setting the xvYCC Setting the xvYCC mode to “On” increases detail and color space when watching movies from an external device (ie. DVD player) connected to the HDMI or Component IN jacks. 24. Press the ▲ or ▼ button to select “xvYCC”, then press the ENTER button.
Configuring Picture Options Activating Picture Options Press the MENU button to display the menu. Press the ENTER button to select “Picture”. Press the ▲ or ▼ button to select “Picture Options”, then press the ENTER button. Press the ▲ or ▼ button to select a particular item. Press the ENTER ➣...
Page 26
When Double ( ) mode has been set in PIP, the Picture Size cannot be set. ➣ Temporary image retention may occur when viewing a static image on the set for more than two hours. ➣ After selecting “Zoom1”, “Zoom2” or “Wide Fit”: ➣...
Page 27
Setting the Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. Follow the “Activating Picture Options” instructions numbers 1 and 2. (Refer to page 23) Press the ▲...
Page 28
Setting the Film Mode The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality. Follow the “Activating Picture Options” instructions numbers 1 and 2. (Refer to page 23) Press the ▲...
Viewing Picture-in-Picture You can use the PIP feature to simultaneously watch the TV tuner (analog broadcasts only) and one external video source. (See page 33 to select the PIP picture sound.) This product has one built-in tuner, which does not allow PIP to function in the same mode.
Page 30
Changing the PIP Channel Press the ▲ or ▼ button to select “Air/Cable”, then press the ENTER button. Press the ▲ or ▼ button to select “Air” or “Cable”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.
Sound Control Changing the Sound Standard You can select the sound mode to best suit the programming you’re watching. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Sound”, then press the ENTER Press the ENTER button to select “Mode”.
Press the ▲ or ▼ button to select a particular frequency to adjust. Press the ◄ or ► button to increase or decrease the level of the particular frequency. • Mode: Selects the sound mode among the predefined settings. • Balance L/R: Adjusts the balance between the right and left speaker.
Choosing Preferred Language The digital-TV transmission system is capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages). Select the language you would like to hear the audio track in. Press the MENU button to display the menu. Press the ▲...
Automatic Volume Control Reduces the differences in volume level among broadcasters. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Sound”, then press the ENTER Press the ▲ or ▼ button to select “Auto Volume”, then press the ENTER button.
Listening to the Sound of the Sub (PIP) Picture When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Sound”, then press the ENTER Press the ▲...
Channel Control Managing Channels Using this menu, you can Add/Delete or set Favorite channels and use the program guide for digital broadcasts. Viewing All Channels Show all currently available channels. To use the Channel List function, first run “Auto Program” (see page 16). Press the MENU button.
Page 37
Erasing and Adding Channels You can delete or add a channel to display the channels you want. Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button.
Page 38
Setting Your Favorite Channels You can set channels you watch frequently as favorites. Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button.
Page 39
Reserving a Program (Timer Viewing) If you reserve a program you want to watch, the channel is automatically switched to the reserved channel in the Channel List; even when you are watching another channel. To reserve a program, set the current time first. See pages 45~46. Reserved channels can only be set if they are in the “Channel List”...
Page 40
Confirming a Viewing Reservation You can view, modify or delete a reservation. Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button.
Page 41
Labeling Channels - Analog Channels can labeled so that their call letters appear whenever the channel is selected. Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. Press the ▲ or ▼ button to select “Channel List”, then press the ENTER button.
Clearing Scrambled Channels - Digital The “Clear Scrambled Channel” function is used to filter out scrambled channels after “Auto Program” is completed. This process may take up to 20~30 minutes. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button.
Checking the Digital-Signal Strength Unlike analog channels, which can vary in reception quality from “snowy” to clear, digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel.
Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) First, click on “Control Panel” on the Windows start menu.
Setting up the TV with your PC How to Auto Adjust Use the Auto “Adjust function” to have the TV set automatically adjust the video signals it receives. The function also automatically fine-tunes the settings and adjusts the frequency values and positions. This function does not work in DVI-Digital mode.
Page 46
Changing the Screen Position Adjust the PC’s screen positioning if it does not fit the TV screen. Preset: Press the SOURCE button to select PC mode. ➣ Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button.
Time Setting Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) Option 1: Setting the Clock Manually Press the MENU button to display the menu.
Page 48
Option 2: Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER Press the ▲...
Page 49
Setting the Sleep Timer The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes). Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER Press the ▲...
Page 50
Setting the On/Off Timer Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Press the ▲ or ▼ button to select “Time”, then press the ENTER Three different On/Off Timer Settings can be made. Press the ▲ or ▼ button to select “Timer 1”, “Timer 2”...
Function Description Selecting a Menu Language Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER Press the ▲ or ▼ button to select “Language”, then press the ENTER button.
Page 52
The “V-Chip” screen will appear. Press the ▲ or ▼ button to select “Change PIN”, then press the ENTER button. The Change PIN screen will appear. Choose any 4 digits for your PIN and enter them. As soon as the 4 digits are entered, the “Confirm new PIN.”...
Page 53
How to Set up Restrictions Using the TV Parental Guidelines First, set up a personal identification number (PIN) and enable the V-Chip. (See previous section.) Parental restrictions can be set up using either of two methods: The TV guidelines or the MPAA rating. Press the MENU button to display the menu.
Page 54
How to Set up Restrictions Using the MPAA Ratings: G, PG, PG-1, R, NC-17, X, NR The MPAA rating system uses the Motion Picture Association of America (MPAA) system and its main application is for movies. When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings (either MPAA or TV-Ratings).
Page 55
How to Set up Restrictions Using the Canadian English Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER button.
Page 56
How to Set up Restrictions Using the Canadian French Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER button.
Page 57
Using the V-Chip for Digital channels Parental restriction information can be used while watching DTV channels. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER button.
Viewing Closed Captions (On-Screen Text Messages) - Analog The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device to TV. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.) Press the MENU button to display the menu.
Viewing Closed Captions (On-Screen Text Messages) - Digital The Digital Captions function operates on digital channels. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER Press the ▲ or ▼ button to select “Caption”, then press the ENTER button.
Adjusting the TV On/Off Melody Sound A melody sound can be set to come on when the TV is powered On or Off. Press the MENU button to display the menu. Press the ▲ or ▼ button to select “Setup”, then press the ENTER Press the ▲...
Using the Energy Saving Feature This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the "Energy Saving “ mode option to “High” to reduce eye fatigue as well as power consumption. Press the MENU button to display the menu.
Upgrading the Software Samsung may offer upgrades for TV's firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG (726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port located on your TV.
Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. ➣ SAMSUNG is not responsible for any data file damage or data loss. Do not disconnect the USB device while it is loading.
Using the WISELINK Menu Press the MENU button. Press the ▲ or ▼ button to select “Application”, then press the ENTER button. Press the ▲ or ▼ button to select “WISELINK”, then press the ENTER button. The “WISELINK” menu is displayed. ➣...
Page 65
Screen Display Photo Preference Monthly Timeline 1 Currently selected photo Shows the currently selected photo. 2 Photo Information Window Shows information about the currently selected photo. You can change the “Color”, “Composition”, and “Favorite”. 3 Current Sort Standard Press the ▲ or ▼ button to change the standard for sorting photos. (“Monthly”, “Timeline”, “Color”, “Composition”, “Folder”, “Preference”) The item that is selected as the sorting standing is highlighted in the Photo Information Window.
Sorting Photo List You can sort photos in the Photo List by a particular standard. Press the W.LINK button on the remote control to display the “WISELINK” menu. Press the ◄ or ► button to select “Photo”, then press the ENTER button.
Page 67
Color Sorts photos by color. You can change the photo color information. ➣ Select “Color” as the sorting standard in the Photo List. Press the ◄ or ► button to select from the sublist of files grouped by color. To move to the previous / next group, press the ➣...
Page 68
Folder Sorts photos by folder. If there are many folders in USB, the photos files are shown in order ➣ in each folder. The photo file in the Root folder is shown first and the others are shown in alphabetical order by name. Select “Folder”...
Page 69
Deleting the Photo file Press the ◄ or ► button to select the desired photo in the Photo list. Press the TOOLS button. Press the ▲ or ▼ button to select “Delete”, then press the ENTER button. The “Delete this file?” message appear. ➣...
Viewing a Photo or Slide Show Viewing a Slide Show Press the W.LINK button on the remote control to display the “WISELINK” menu. Press the ◄ or ► button to move to “Photo”, then press the ENTER button. Photo files are displayed. ➣...
Page 71
Viewing a photo Press the W.LINK button on the remote control to display the “WISELINK” menu. Press the ◄ or ► button to move to “Photo”, then press the ENTER button. Photo files are displayed. ➣ Press the ◄ or ► button to select the desired photo in the Photo list. Then Press the Yellow button to select only one file.
Page 72
Zoom You can zoom into images in full screen mode. Press the ▲ or ▼ button to select “Zoom”, then press the ENTER Press the ◄ or ► button repeatedly to increase or decrease the Zoom effect. (x1 → x2 → x4) To move the enlarged photo image, press the ENTER the ▲/▼/◄/►...
Page 73
Background Music Setting You can set the background music. Press the ▲ or ▼ button to select “Background Music Setting”, then press the ENTER button. If you turn off the “Background Music”, even if the “Background Music ➣ Settings” have been set up, the background music will not be played. Loading music files is needed to change BGM mode.
Using the Music List This menu shows MP3 files from among the files saved on a USB memory device. Press the W.LINK button on the remote control to display the “WISELINK” menu. Press the ◄ or ► button to select “Music”, then press the ENTER button.
5 Item Selection Information Shows the number of music files that are selected by pressing the Yellow button. 6 Help Items • Red(Device) button: Selects a connected device. • Green(Favorites Setting) button: Changes the favorites setting for the selected music. Press this button repeatedly until the desired value appears.
Page 76
Artist Sorts music files by the artist. It sorts the music file by artist in alphabetical order. ➣ 1. Select “Artist” as the sorting standard in the Music List. Press the ◄ or ► button to select from the sublist of files grouped in alphabetical order.
Page 77
Genre Sorts music files by the genre. Select “Genre” as the sorting standard in the Music List. Press the ◄ or ► button to select from the sublist of files grouped by Genre. To move to the previous / next group, press the ➣...
Page 78
Deleting the Music file Press the ◄ or ► button to select the desired music file in the music list. Press the TOOLS button. Press the ▲ or ▼ button to select “Delete”, then press the ENTER button. The “Delete this file?” message appear. ➣...
Playing a Music File Playing a music file Press the W.LINK button on the remote control to display the “WISELINK” menu. Press the ◄ or ► button to select “Music”, then press the ENTER button. Music files are displayed. ➣ Pressing the ◄ or ► button to select a music file to be played, then press the ENTER button.
Page 80
Playing the selected music files Press the W.LINK button on the remote control to display the WISELINK menu. Press the ◄ or ► button to select “Music”, then press the ENTER button. Press the ◄ or ► button to select the desired music file, then press the yellow button.
Using the Setup Menu Setup displays the user settings of the WISELINK menu. Press the W.LINK button on the remote control to display the WISELINK menu. Press the ◄ or ► button to select “Setup”, then press the ENTER button. Press the ▲...
Connecting Anynet + Devices The Anynet + system can be used only with Samsung devices that have the Anynet + feature. To be sure your Samsung device has this feature, check if there is an Anynet + logo on it.
Setting Up Anynet + The following settings help set the Anynet + functions. To use the Anynet+ Function, Anynet + (HDMI-CEC) must be set to On Press the MENU button. Press the ▲ or ▼ button to select “Application”, then press the ENTER button.
➣ Recording You can make a recording of a TV program using a Samsung recorder. Press the TOOLS button. Press the ▲ or ▼ button to select Recording Immediately and press the ENTER button.
Listening through a Receiver (Home theater) You can listen to sound through a receiver instead of the TV speaker. Press the TOOLS button. Press the ▲ or ▼ button to select “Receiver”. Press the ◄ or ► button to select to “On”. Now you can listen to sound through the receiver.
Appendix Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call Samsung customer service at 1-800-SAMSUNG. Problem Poor picture. Poor sound quality. No picture or sound.
Page 87
Problem Image is not stable and may appear to vibrate when you have a computer connected to the PC input. Image is not centered on the screen. The picture appears distorted in the corner of the screen. The “Resets all settings to the default values.”...
Installing the Stand Attach your LCD TV to the stand. Two or more people should carry the TV. ➣ Make sure to distinguish between the front and back of the stand when attaching it. ➣ To make sure the TV is installed on the stand at a proper level, do not apply excess downward pressure to the ➣...
Auto Wall-Mount Adjustment (Sold separately) Once the auto wall mount is installed, your TV’s position can be easily adjusted. TV Rear Panel EX-LINK Cable (Not supplied) Entering the menu Press the ▲, ▼, ◄ or ► button on your remote control. The Wall Mount Adjustment screen is displayed.
Do not fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents. Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or ➣...
Using the Anti-Theft Kensington Lock The Kensington Lock is a device used to physically fix the system when using it in a public place. The appearance and locking method may differ from the illustration depending on the manufacturer. Refer to the manual provided with the Kensington Lock for proper use.
Specifications Model Name Screen Size (45.9 inches measured diagonally) (Diagonal) PC Resolution Sound Output Dimensions (WxDxH) Body With stand Weight With Stand Without Stand Environmental Considerations Operating Temperature Operating Humidity Storage Temperature Storage Humidity Stand Swivel (Left / Right) Design and specifications are subject to change without prior notice. ➣...
Page 95
The GNU General Public License (GPL) Version 2, June 11 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it.
Page 96
These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it.
Page 97
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.
Page 98
GNU Lesser General Public License (LGPL) Version 2.1, February 1 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL.
Page 99
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any software library or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called “this License”).
Page 100
5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a “work that uses the Library”. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License.
Page 101
10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients’...
Page 102
END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License).
Page 103
Tenga cuidado en la selección y duración de los formatos de televisión utilizados para la visualización. La garantía limitada de Samsung no cubre el envejecimiento desigual de la LCD como resultado de la selección y uso de formatos, así como otras imágenes retenidas.
Page 104
Contenido Información General ■ Listado de características ...2 ■ Accesorios ...2 ■ Aspecto general del panel de control ...3 ■ Aspecto general del panel de conexiones ...4 ■ Mando a distancia ...5 ■ Instalación de las pilas en el mando a distancia ...6 Conexiones ■...
Información General Listado de características • Valores ajustables de la imagen que se pueden almacenar en la memoria del televisor. • Temporizador automático para encender o apagar el televisor. • Temporizador de desconexión especial. • Excelente interfaz digital y capacidad de trabajo en red: El sintonizador digital HD incorporado permite ver las emisiones HD que no exigen una suscripción sin que sea necesario disponer de un receptor de televisión por cable/satélite (decodificador).
Aspecto general del panel de control Botónes de la parte inferior derecha del panel Los botónes del panel inferior derecho controlan las funciones básicas del televisor, incluido el menú en pantalla. Para usar las funciones más avanzadas, debe usar el mando a distancia. El color y la forma del producto pueden variar según el modelo.
Aspecto general del panel de conexiones Use los terminales del panel de conexión para conectar componentes de A/V que estarán disponibles permanentemente, como un vídeo o un reproductor de DVD. Si precisa información sobre la conexión de equipos, consulte las páginas 6 a 11. [Panel posterior del tV] El color y la forma del producto pueden variar según el modelo.
DMA, WISELINK y Anynet + . : Este mando remoto se puede usar para controlar la grabación en las grabadoras de Samsung con la función Anynet + ). ON/OFF Pulse este botón para activar la luz de fondo de los botones del mando a distancia.
Instalación de las pilas en el mando a distancia Levante la tapa de la parte posterior del mando a distancia, como se muestra en la ilustración. Coloque dos pilas de tamaño AAA. Compruebe que los extremos “+” y “-” de las pilas concuerdan con el diagrama del ➣...
Conexión de tV por cable Para conectar a un sistema de TV por cable, siga estas instrucciones. tV por cable sin decodificador Conecte el cable de entrada en el terminal de la antena ANT IN de la parte posterior del TV. Dado que el TV está...
Conexión de un reproductor de DVD o receptores de televisión por cable/satélite (decodificadores) a través de HDMI Solo es aplicable si hay un conector de salida de HDMI en el dispositivo externo. Conecte un cable reproductor de DVD/receptor de cable/ HDMI entre la toma HDMI IN (1, 2 o 3) del televisor y la...
Conexión de un reproductor de DVD o receptores de televisión por cable/ satélite (decodificadores) a través de los cables de componentes Las tomas del panel posterior del televisor facilitan la conexión de un reproductor de DVD o un receptor de televisión por cable/ satélite (decodificador) al TV.
Conexión de S-Vídeo Este televisor Samsung se puede conectar a un terminal S-Video de un aparato de vídeo. (Esta conexión proporciona una calidad de imagen mejor que una conexión normal de vídeo.) Para empezar, siga los...
Conexión de un sistema de audio digital Los terminales del panel posterior del televisor facilitan la conexión de un sistema de audio digital (Home Cinema/receptor) al televisor. Conecte un cable óptico entre las tomas “DIGITAL AUDIO OUT (OPTICAL)” Salida de audio digital, óptica) del televisor y las tomas Digital Audio Entrada Entrada de audio digital) del sistema de...
Funcionamiento Encendido o apagado del tV Pulse el botón POWER del mando a distancia. También puede usar el botón POWER Función Plug & Play Cuando se enciende el televisor por primera vez, se configuran seguidos y automáticamente dos ajustes básicos del usuario. Pulse el botón POWER en el mando a distancia.
Pulse el botón ENTER Pulse los botón ▲ o ▼ para seleccionar “Auto” después, pulse el botón ENTER . Se muestra el mensaje “Configurar la hora de verano.”. Si selecciona “Manual”, se muestra “Configurar fecha y hora actuales”. (Consulte las páginas 45) Pulse los botón ▲...
Uso del botón El botón se utiliza para seleccionar emisoras que emitan con señal digital. Por ejemplo, para seleccionar el canal 7-1, pulse , HD indica que el televisor está recibiendo una señal digital de alta ➣ definición. SD indica que el televisor está recibiendo una señal digital de definición estándar.
Uso del botón TOOLS Se puede usar el botón TOOLS para seleccionar rápida y fácilmente las funciones que se usan con más frecuencia. El menú “HERRAMIENTAS” cambia según el modo de entrada externo que se está viendo. Pulse el botón TOOLS. Aparece el menú...
Page 119
Almacenamiento de los canales en la memoria (método automático) Pulse el botón MENU para visualizar el menú. Pulse los botón ▲ o ▼ para seleccionar “Canal” y, después, pulse el botón ENTER Pulse los botón ▲ o ▼ para seleccionar “Prog. Auto” y, después, pulse el botón ENTER Pulse los botón ▲...
Para seleccionar la fuente Úselo para seleccionar TV u otras fuentes de entrada externas como reproductores de DVD o receptores de cable y satélite (decodificadores), conectados al televisor. Permite seleccionar la fuente de entrada que se prefiera. Pulse el botón MENU para ver el menú en pantalla. Pulse los botón ▲...
Control de la Imagen Cambio del formato de la imagen Puede seleccionar el tipo de imagen que mejor cumpla sus requisitos de visualización. Pulse el botón MENU para ver el menú en pantalla. Pulse el botón ENTER para seleccionar “Imagen”. Pulse el botón ENTER para seleccionar “Modo”.
Activación de la configuración detallada Los nuevos televisores Samsung permiten una configuración más precisa de la imagen que los modelos anteriores. Consulte más adelante cómo realizar una configuración detallada. Activación de la configuración detallada Pulse el botón MENU para ver el menú.
Page 123
Ajuste de la gama Se puede ajustar la intensidad de los colores primarios (rojo, verde y azul). (-3 ~ +3) Pulse los botón ▲ o ▼ para seleccionar “Gamma” y pulse el botón ENTER Pulse los botones ◄ o ► para disminuir o aumentar el valor. Pulse el botón ENTER Configuración del espacio de color El espacio de color es una matriz compuesta por los colores rojo, verde y azul.
Page 124
Ajuste del balance de blancos Se puede ajustar la temperatura del color para conseguir colores más naturales. 17. Pulse los botón ▲ o ▼ para seleccionar “Balance de blanco” y, a continuación, pulse el botón ENTER 18. Seleccione la opción necesaria pulsando los botón ▲ o ▼ y, a continuación, pulse el botón ENTER 19.
Configuración de xvYCC Si ajusta el modo xvYCC como “Encendido” se aumenta el detalle y el espacio de color mientras se ven películas desde un dispositivo externo (es decir, un reproductor DVD) conectado en las tomas HDMI o Component IN. 24.
Activación de las opciones de la imagen Activación de las opciones de la imagen Pulse el botón MENU para ver el menú en pantalla. Pulse el botón ENTER para seleccionar “Imagen”. Pulse los botón ▲ o ▼ para seleccionar “Opciones de imagen” y, a continuación, pulse el botón ENTER Pulse los botones ▲...
Page 127
Si se ha seleccionado el modo doble ( ➣ Puede producirse una retención temporal de imagen cuando se ve una imagen estática durante más de dos horas. ➣ Después de seleccionar “Zoom1”, “Zoom2” o “Ajuste ancho”: ➣ Pulse los botones ◄ o ► para seleccionar “Posición” y, a continuación, pulse el botón ENTER .
Page 128
Configuración de la reducción digital de ruido Si la señal de emisión que recibe el televisor es débil, puede activarse la función de reducción digital del ruido (Digital Noise Reduction) para reducir la estática y las imágenes superpuestas que pueden aparecer en la pantalla. Sigas las instrucciones 1 y 2 de “Activación de las opciones de la imagen”.
Page 129
Configuración del modo de película El televisor se puede configurar para detectar automáticamente y procesar las señales de las películas procedentes de todas las fuentes y ajustar la imagen para conseguir una calidad óptima. Sigas las instrucciones 1 y 2 de “Activación de las opciones de la imagen”. (Consulte la página 23) Pulse los botón ▲...
Visualización Imagen en imagen Puede usar la función PIP para ver simultáneamente la televisión (sólo emisiones analógicas) y una fuente de video externa. (Vea la pagina 33 para seleccionar el sonido de la imagen PIP.) Este producto lleva un sintonizador incorporado que no permite la función PIP en el mismo modo.
Page 131
Cambio del canal PIP Pulse los botón ▲ o ▼ para seleccionar “Aire/Cable” y, a continuación, pulse el botón ENTER Pulse los botón ▲ o ▼ para seleccionar “Aire” o “Cable” y, a continuación, pulse el botón ENTER Pulse los botón ▲ o ▼ para seleccionar “Canal” y, a continuación, pulse el botón ENTER Pulse los botón ▲...
Control de Sonido Cambio del estándar de sonido Puede seleccionar el modo de sonido que mejor se ajuste al programa que está viendo. Pulse el botón MENU para ver el menú en pantalla. Pulse los botón ▲ o ▼ para seleccionar “Sonido” y, a continuación, pulse el botón ENTER Pulse el botón ENTER para seleccionar “Modo”.
Pulse los botón ▲ o ▼ para seleccionar una frecuencia determinada con el fin de ajustarla. Pulse los botón ◄ o ► para aumentar o reducir el nivel de una frecuencia concreta. • Modo: Selecciona el modo de sonido entre los valores predefinidos. •...
Elección del idioma preferido El sistema de transmisión de TV digital permite transmitir simultáneamente muchas pistas de audio (por ejemplo, traducciones simultáneas del programa en otros idiomas). Seleccione el idioma con el que desea oír la pista de audio. Pulse el botón MENU para ver el menú en pantalla. Pulse los botón ▲...
Control automático de volumen Reduce las diferencias en el nivel de volumen entre las emisoras. Pulse el botón MENU para ver el menú en pantalla. Pulse los botón ▲ o ▼ para seleccionar “Sonido” y, a continuación, pulse el botón ENTER Pulse los botón ▲...
Escuchar el sonido de la sub imagen del PIP Cuando la opción PIP esta activada, usted puede escuchar el sonido de la sub imagen del PIP. Pulse el botón MENU para ver el menú en pantalla. Pulse los botón ▲ o ▼ para seleccionar “Sonido” y, a continuación, pulse el botón ENTER Pulse los botón ▲...
Control de los Canales Gestión de los canales Con este menú puede agregar y borrar los canales o configurarlos como favoritos y usar la guía de programas de las emisoras digitales. Visualización de todos los canales Puede ver todos los canales que tiene disponibles. Para usar la función “Lista de canales”, primero debe ejecutar “Prog.
Page 138
Supresión y adición de canales Puede suprimir o añadir un canal para que se muestren los canales que desee. Pulse el botón MENU. Pulse los botón ▲ o ▼ para seleccionar “Canal” y, a continuación, pulse el botón ENTER Pulse los botón ▲ o ▼ para seleccionar “Lista de canales” y, a continuación, pulse el botón ENTER Pulse el botón ◄...
Page 139
Ajuste de los canales favoritos Puede configurar como favoritos los canales que vea con más frecuencia. Pulse el botón MENU. Pulse los botón ▲ o ▼ para seleccionar “Canal” y, a continuación, pulse el botón ENTER Pulse los botón ▲ o ▼ para seleccionar “Lista de canales” y, a continuación, pulse el botón ENTER Pulse el botón ◄...
Page 140
Reserva de un programa (visualización con temporizador) Si reserva un programa que desea ver, el canal se cambia automáticamente al canal reservado en la lista de canales aunque esté viendo otro canal. Para reservar un canal primero debe configurar la hora actual. Consulte las páginas 45~46. Los canales reservados sólo se pueden configurar si se encuentran en “Lista de canales”.
Page 141
Confirmación de una reserva de visualización Se puede ver, cambiar o borrar una reserva. Pulse el botón MENU. Pulse los botón ▲ o ▼ para seleccionar “Canal” y, a continuación, pulse el botón ENTER Pulse los botón ▲ o ▼ para seleccionar “Lista de canales” y, a continuación, pulse el botón ENTER Pulse el botón ◄...
Page 142
Etiquetado de canales analógicos Los canales se pueden etiquetar con el propósito de que cuando éstos se seleccionan se pueda ver su nombre. Pulse el botón MENU. Pulse los botón ▲ o ▼ para seleccionar “Canal” y, a continuación, pulse el botón ENTER Pulse los botón ▲...
Supresión de los canales codificados digitales La función “Borrar canal encriptado” se usa para filtrar los canales codificados después de que “Prog. Auto” se haya completado. Puede tardar de 20 a 30 minutos. Pulse el botón MENU para ver el menú en pantalla. Pulse los botón ▲...
Comprobación de la potencia de la señal digital A diferencia de los canales analógicos, cuya calidad de recepción puede variar desde “nebuloso” a claro, los canales digitales (HDTV) tienen una calidad de recepción perfecta o no se reciben en absoluto. Por tanto, a diferencia de los canales analógicos, no puede sintonizar ningún canal digital.
Pero aunque las pantallas reales tengan un aspecto diferente, se aplicarán los mismos ajustes básicos e información en la mayoría de los casos. (Si no es así, póngase en contacto con el fabricante del ordenador o con un concesionario Samsung.) Primero, haga clic en “Panel de control” en el menú Inicio de Windows.
Ajuste del televisor con el ordenador Cómo realizar el Ajuste automático Mediante la función “Ajuste Auto” se puede establecer que el televisor se ajuste automáticamente de acuerdo con las señales de vídeo que reciba. La función también ajusta automáticamente con más configuración y ajusta los valores y las posiciones de la frecuencia.
Page 147
Cambio de la posición de la pantalla Ajuste la posición de la pantalla del PC si no se acopla a la pantalla del TV. Preselección: Pulse el botón SOURCE para seleccionar el modo PC. ➣ Pulse el botón MENU para ver el menú en pantalla. Pulse los botón ▲...
Ajuste de la Hora Configuración del reloj Establecer el reloj es necesario para usar las distintas características de temporizador del TV. Además, puede comprobar la hora mientras está viendo el TV. (Simplemente pulse INFO.) Opción 1: Ajuste manual del reloj Pulse el botón MENU para ver el menú...
Page 149
Opción 2: Ajuste automático del reloj El reloj puede ajustarse automáticamente cuando se recibe una señal digital. Pulse el botón MENU para ver el menú en pantalla. Pulse los botón ▲ o ▼ para seleccionar “Configuración” y, a continuación, pulse el botón ENTER Pulse los botón ▲...
Page 150
Configuración del temporizador de sueño El temporizador de desconexión apaga automáticamente el televisor después de un período prefijado (entre 30, 60, 90, 120, 150 y 180 minutos). Pulse el botón MENU para ver el menú en pantalla. Pulse los botón ▲ o ▼ para seleccionar “Configuración” y, a continuación, pulse el botón ENTER Pulse los botón ▲...
Page 151
Activación y desactivación del temporizador Pulse el botón MENU para ver el menú en pantalla. Pulse los botón ▲ o ▼ para seleccionar “Configuración” y, a continuación, pulse el botón ENTER Pulse los botón ▲ o ▼ para seleccionar “Tiempo” y, a continuación, pulse el botón ENTER La activación y desactivación del temporizador se puede configurar de tres maneras.
Descripción de las Funciones Selección del idioma de menú Pulse el botón MENU para ver el menú en pantalla. Pulse los botón ▲ o ▼ para seleccionar “Configuración” y después, pulse el botón ENTER Pulse los botón ▲ o ▼ para seleccionar “Idioma” y después, pulse el botón ENTER Pulse los botón ▲...
Page 153
Aparecerá la pantalla “V-Chip”. Pulse los botón ▲ o ▼ para seleccionar “Cambiar Código” y, después, pulse el botón ENTER . Aparecerá la pantalla Cambiar Código. Escriba un nuevo código PIN de 4 dígitos. En cuanto introduzca los 4 dígitos, aparece la pantalla “Confirmar Nuevo Código”.
Page 154
Configuración de restricciones usando la sección Guías pater. tV Primero, establezca un número de identificación personal (PIN) y active V-Chip. (Consulte la sección anterior.) Las restricciones del bloqueo de programas se pueden establecer mediante dos métodos: Las guía de programas o la clasificación MPAA.
Page 155
Configuración de las restricciones mediante las clasificaciones MPAA: G, PG, PG-13, r, NC-17, X, Nr El sistema de clasificación MPAA utiliza el sistema de la MPAA (Motion Imagen Association of America, Asociación americana de cinematografía) que se aplica principalmente en las películas. Si el bloqueo de V-Chip está activado, el televisor bloqueará...
Page 156
Cómo configurar las restricciones en el idioma Inglés Canadiense Pulse el botón MENU para ver el menú en pantalla. Pulse los botón ▲ o ▼ para seleccionar “Configuración” y, a continuación, pulse el botón ENTER Pulse los botón ▲ o ▼ para seleccionar “V-Chip” y, a continuación, pulse el botón ENTER Aparecerá...
Page 157
Cómo configurar las restricciones en el idioma Francés Canadiense Pulse el botón MENU para ver el menú en pantalla. Pulse los botón ▲ o ▼ para seleccionar “Configuración” y, a continuación, pulse el botón ENTER Pulse los botón ▲ o ▼ para seleccionar “V-Chip” y, a continuación, pulse el botón ENTER Aparecerá...
Page 158
Uso de V-Chip con los canales digitales La información de la restricción de bloqueo se puede usar mientras se ven los canales DTV. Pulse el botón MENU para ver el menú en pantalla. Pulse los botón ▲ o ▼ para seleccionar “Configuración” y, a continuación, pulse el botón ENTER Pulse los botón ▲...
Visión de subtítulos (mensajes de texto en pantalla) - Analógico La función Analog Caption (Subtítulo analógico) funciona tanto en el modo de canal de televisión analógica o como cuando la señal proviene de un dispositivo externo. (Dependiendo de la señal de transmisión, puede funcionar en canales digitales.) Pulse el botón MENU para ver el menú...
Visión de subtítulos (mensajes de texto en pantalla) - Digital La función Subtítulo digital funciona en canales digitales. Pulse el botón MENU para ver el menú en pantalla. Pulse los botón ▲ o ▼ para seleccionar “Configuración” y, a continuación, pulse el botón ENTER Pulse los botón ▲...
Ajuste de la melodía de encendido y apagado del televisor Puede definirse un sonido de melodía para que suene cuando se encienda o se apague el TV. Pulse el botón MENU para ver el menú en pantalla. Pulse los botón ▲ o ▼ para seleccionar “Configuración” y, a continuación, pulse el botón ENTER Pulse los botón ▲...
Uso de la función de ahorro de energía Esta función ajusta el brillo del televisor, lo cual reduce el consumo de energía. Si desea ver la televisión por la noche, ajuste la opción del modo “Ahorro energía” en “Alto” ; sus ojos se lo agradecerán y, además, reducirá el consumo de energía.
Guía de actualización del software Samsung puede ofrecer actualizaciones para el firmware del televisor en el futuro. Póngase en contacto con el centro de llamadas de Samsung en 1-800-SAMSUNG(726-7864) para recibir información acerca de la descarga de las actualizaciones y del uso de un controlador USB. Las actualizaciones se pueden realizar conectando una unidad USB al puerto USB situado en el televisor.
Antes de conectar el dispositivo al televisor, haga una copia de seguridad de sus archivos para evitar daños o ➣ pérdidas de datos. SAMSUNG no se hace responsable por cualquier daño en los archivos o pérdida de datos. No desconecte el dispositivo USB mientras se esté cargando.
Uso del menú WISELINK Pulse el botón MENU. Pulse los botones ▲ o ▼ para seleccionar “Aplicacion”, a continuación pulse el botón ENTER Pulse los botones ▲ o ▼ para seleccionar “WISELINK”, a continuación pulse el botón ENTER Se muestra el menú “WISELINK”. ➣...
Page 166
Pantalla de visualización Photo Preferencias Mensual Fecha 1 Foto actualmente seleccionada Muestra la foto actualmente seleccionada. 2 Ventana de información de la foto Muestra la información sobre la foto seleccionada. Se pueden cambiar “Color”, “Composición” y “Favoritos”. 3 Norma de clasificación actual Pulse los botones ▲...
Clasificación de la lista de fotos Se pueden clasificar las fotos de la lista según una norma particular. Pulse el botón W.LINK del mando a distancia para mostrar el menú “WISELINK”. Pulse los botones ◄ o ► para seleccionar “Photo”, a continuación pulse el botón ENTER Se muestran los archivos de fotos.
Page 168
Color Ordena las fotos por color. Se puede cambiar la información del color de la foto. ➣ Seleccione “Color” como orden estándar de la lista de fotos. Pulse los botones ◄ o ► para seleccionar en la lista secundaria de archivos agrupados por color.
Page 169
Carpeta Ordena las fotos por carpetas. Si hay varias carpetas en USB, los archivos de fotos se muestran ➣ ordenados en cada carpeta. El archivo de fotos de la carpeta raíz se muestra primero y los otros se muestran ordenados alfabéticamente por nombre.
Page 170
Eliminación de archivos de fotos Pulse los botones ◄ o ► para seleccionar la foto que desee en la lista. Pulse el botón TOOLS. Pulse los botones ▲ o ▼ para seleccionar “Borrar” y, a continuación, pulse el botón ENTER Aparece el mensaje “¿Borrar arch.
Visualización de una foto o una presentación Visualización de una presentación Pulse el botón W.LINK del mando a distancia para mostrar el menú “WISELINK”. Pulse los botones ◄ o ► para ir a “Photo”, a continuación pulse el botón ENTER Se muestran los archivos de fotos.
Page 172
Visualización de una foto Pulse el botón W.LINK del mando a distancia para mostrar el menú “WISELINK”. Pulse los botones ◄ o ► para ir a “Photo”, a continuación pulse el botón ENTER Se muestran los archivos de fotos. ➣ Pulse los botones ◄...
Page 173
Ampliación de una imagen Puede ampliar las imágenes en el modo de pantalla completa. Pulse los botones ▲ o ▼ para seleccionar “Zoom”, a continuación pulse el botón ENTER . Pulse los botones ◄ o ► para disminuir o aumentar el efecto de la ampliación.
Page 174
Configuración de la música de fondo Se puede configurar la música de fondo. Pulse los botones ▲ o ▼ para seleccionar “Configuración de la música de fondo” y, a continuación, pulse el botón ENTER Si “Música de fondo” está configurado como Apagado, aunque se haya ➣...
Uso de la lista de música El menú muestra los archivos MP3 que se encuentran entre los archivos guardados en un dispositivo de memoria USB. Pulse el botón W.LINK del mando a distancia para mostrar el menú “WISELINK”. Pulse los botones ◄ o ► para seleccionar “Music”, a continuación pulse el botón ENTER Se muestran los archivos de música.
5 Información de selección del elemento Muestra el número de archivos de música seleccionados cuando se pulsa el botón amarillo. 6 Elementos de ayuda • Botón rojo (Dispositivo): Selecciona el dispositivo conectado. • Botón verde (Conf fav): Cambia la configuración de favorito de la música seleccionada. Pulse este botón varias veces hasta que se muestre el valor que desee.
Page 177
Artista Ordena los archivos de música por el artista. Ordena los archivos de música por artista y en orden alfabético. ➣ Seleccione “Artista” como orden estándar de la lista de música. Pulse los botones ◄ o ► para seleccionar en la lista secundaria de archivos agrupados alfabéticamente.
Page 178
Género Ordena los archivos de música por el género. Seleccione “Género” como orden estándar de la lista de música. Pulse los botones ◄ o ► para seleccionar en la lista secundaria de archivos agrupados por género. Para ir al grupo anterior/siguiente, pulse los botones ➣...
Page 179
Supresión de archivos de música Pulse los botones ◄ o ► para seleccionar el archivo de música que desee en la lista. 2. Pulse el botón TOOLS. Pulse los botones ▲ o ▼ para seleccionar “Borrar” y, a continuación, pulse el botón ENTER Por ejemplo, aparece el mensaje “¿Borrar arch.
Reproducción de un archivo de música Reproducción de un archivo de música Pulse el botón W.LINK del mando a distancia para mostrar el menú “WISELINK”. Pulse los botones ◄ o ► para seleccionar “Music”, a continuación pulse el botón ENTER Se muestran los archivos de música.
Page 181
Reproducción de archivos de música seleccionados Pulse el botón W.LINK del mando a distancia para mostrar el menú “WISELINK”. Pulse los botones ◄ o ► para seleccionar “Music”, a continuación pulse el botón ENTER Pulse los botones ◄ o ► para seleccionar el archivo de música que desee y, a continuación, pulse el botón amarillo.
Uso del menú de configuración El menú de configuración muestra al usuario la configuración del menú “WISELINK”. Pulse el botón W.LINK del mando a distancia para mostrar el menú “WISELINK”. Pulse los botones ◄ o ► para seleccionar “Setup”, a continuación pulse el botón ENTER Pulse los botones ▲...
Conexión de dispositivos Anynet + El sistema Anynet + sólo se puede usar con dispositivos de Samsung que tengan la función Anynet + . Para asegurarse de que el dispositivo de Samsung tenga dicha función, compruebe si lleva el logotipo Anynet + .
Configuración de Anynet + Los parámetros siguientes le ayudarán a usar las funciones Anynet + . Para usar la función Anynet + , Anynet + (HDMI-CEC) debe estar configurado como Enc. Pulse el botón MENU. Pulse los botón ▲ o ▼ para seleccionar “Aplicacion”, y, a continuación, pulse el botón ENTER Pulse los botón ▲...
➣ El funcionamiento de ➣ Grabación La grabadora de Samsung permite efectuar una grabación de un programa de televisión. Pulse el botón TOOLS. Pulse los botones ▲ o ▼ para seleccionar Recording Immediately y pulse el botón ENTER . Comienza la grabación.
Escucha a través de un receptor Se puede escuchar sonido a través de un receptor en lugar de hacerlo mediante el altavoz del TV. Pulse el botón TOOLS. Pulse los botones ▲ o ▼ para seleccionar “Receptor”. Pulse los botones ◄ o ► para seleccionar “Encendido”. Ahora podrá escuchar el sonido a través del receptor.
Si cree que el televisor tiene un problema, compruebe primero esta lista de posibles problemas y soluciones. Si ninguno de los consejos funciona, póngase en contacto con el centro de atención al cliente de Samsung o llame al 1-800-SAMSUNG. Problema Imagen deficiente.
Page 188
Problema La pantalla está negra y el indicador luminoso de alimentación parpadea constantemente. La imagen no es estable y parece vibrar cuando se conecta el ordenador en la entrada de PC. La imagen no está centrada en la pantalla. La imagen aparece distorsionada en la esquina de la pantalla.
Instalación del soporte Acople el TV LCD al soporte. El televisor lo deben transportar dos o más personas. ➣ Cuando monte el soporte debe distinguir entre la parte frontal y la posterior del soporte. ➣ Para asegurarse de que instala el televisor en el soporte al nivel adecuado, no aplique una presión excesiva en la ➣...
Ajuste de montaje mural automático (se vende por separado) Una vez instalado el montaje mural automático, la posición del televisor se puede ajustar fácilmente. Panel posterior del tV Cable EX-LINK (no suministrado) Acceso al menú Pulse los botones ▲, ▼, ◄ o ► del mando a distancia. Se muestra la pantalla del Ajuste del montaje mural.
éste con riesgo de causar lesiones personales. Samsung no se hace responsable de este tipo de accidentes. Samsung no se hace responsable de daños o lesiones personales cuando se usa un montaje mural que no cumple ➣...
Uso del cierre antirrobo kensington El bloqueo Kensington es un dispositivo que se usa para fijar físicamente el sistema cuando se usa en un lugar público. La apariencia y el método de bloqueo pueden diferir de la ilustración según los fabricantes. Consulte el manual que acompaña al bloqueo Kensington para utilizarlo correctamente.
Especificaciones Nombre del Modelo Tamaño de pantalla 46 pulgadas (45,9 pulgadas medidas (Diagonal) PC Resolución Sonido Salida Dimensiones (WxDxH) Cuerpo principal Con soporte Peso Con el soporte Después sw plegar la base Factores medioambientales Temperatura de funcionamiento Humedad de funcionamiento Temperatura de almacenamiento Humedad de almacenamiento Giro del soporte...