Saving A Memory - Epson H928A User Manual

Adjusting the Image
Viewing the Image at the Saved Image Quality
(Memory Function)

Saving a Memory

By using the memory function, you can register the following adjustment values, and then load them when
necessary.
• Image setting from the Configuration menu
• Adjustment values for Lens Adjustment Function (Focus, Zoom, Lens Shift, Blanking) s
a
Make the settings or adjustments you
want to register.
b
Press the
c
Use the
select Save Memory or Save Lens
Position, and then press the
button to confirm the selection.
Save Memory: Registers the Image
settings
Save Lens Position: Registers the
adjustment value for the lens adjustment
function
Loading, Deleting, and Renaming a Memory
You can load, delete, and rename registered memories.
Press the button, and then select the target function on the screen displayed.
c
•
Press the
Position registered in Memory1 or Memory2.
•
The position of the lens when loading the memory and the position of the lens when the memory is
registered may not be exactly the same.
button.
buttons to
buttons on the remote control to load the lens position from the Save Lens
d
Use the
select the memory name to be saved,
and then press the
confirm the selection.
The current projector settings are saved to
the memory.
If the mark on the left of the memory name
is turned aqua, it means the memory has
already been registered. When you select a
registered memory, a message is displayed
asking you to confirm that you want to
overwrite the memory. If you select Yes, the
previous content is erased and the current
settings are saved.
42
p.28
buttons to
button to