Adjusting The Projected Image; Displaying The Test Pattern; Lens Adjustment Function (Focus, Zoom, Lens Shift) - Epson H928A User Manual

Basic Operations

Adjusting the Projected Image

Displaying the Test Pattern

When adjusting the zoom/focus or the projection position just after setting up the projector, you can display
a test pattern instead of connecting video equipment.
Press the button on the remote control to display the test pattern. The standard for horizontal lines
at the top and bottom uses 2.40:1 CinemaScope.
When you select Color Isolation while projecting images, the color selected from R (red), G (green), or B (blue)
is projected (EH-TW9400W/EH-TW9400 only).
Press the button again to end the test pattern display.

Lens Adjustment Function (Focus, Zoom, Lens Shift)

To adjust the focus, zoom, or lens shift, press the
the control panel, and then select the item you want to adjust.
Remote control
The adjustment items switch as shown in the following table.
1 Focus adjustment
2 Zoom adjustment
3 Lens shift adjustment
To finish making adjustments, press the
c
You can register the results of lens adjustment to the memory (Save Lens Position). You can load the
lens position that you registered from the remote control or the Configuration menu.
button on the remote control or the
Adjust Focus is displayed on the screen.
Adjusts the focus of the projected image.
Adjust Zoom is displayed on the screen.
Adjusts the size of the projected image.
Adjust Lens Shift is displayed on the screen.
Adjusts the position of the projected image.
button in Lens shift adjustment.
28
Control panel
p.29
s
p.29
s
p.30
s
button on