Table of Contents
Advertisement
Installation and Technical Manual for the
Limitless™ Multi-Protocol Receiver, WMPR Series
9 | WMPR MOUNTING
The WMPR is intended to be mounted to a DIN Rail or mounted
via the mounting plate.
9.1 | DIN Rail Mounting
The WMPR DIN Rail bracket is supplied with the WMPR and can
be "snapped" onto a 35 mm DIN Rail.
Figure 59. Limitless™ WMPR DIN Rail bracket
9.2 | Tab Mounting
The WMPR has four tabs mounting holes intended to allow
mounting with a #8 style screw. As there are many types of
screw fasteners, care should be taken to not overtighten the
fastener. Also, ensure that the housing is being mounted on a
flat surface.
36 sensing.honeywell.com
Figure 60. Limitless™ WMPR Mounting Plate
10 | INSPECTION AND
MAINTENANCE
10.1 | WMPR Inspection and Replacement
Periodic inspection
•
Check the WMPR housing and connectors for signs of
damage. Replace if necessary
•
Check the condition of the LCD display for signs of crack-
ing or damage. Replace WMPR if necessary
•
Check the proper operation of the Function Buttons and if
found non-functional, replace WMPR
10.2 | Antenna Inspection and Replacement
•
Check antenna or cable connection to WMPR connector to
ensure it is tight and bear no signs of damage or corrosion.
Replace if necessary per Section 8.
ISSUE B
32309669
Advertisement
Table of Contents
