Yaesu VX-150 Operating Manual page 45

Set Item 16 [ KEY BP ]
Function: Enable/disable the Keypad beeper.
Available Values: ON/OFF
Default: ON
Set Item 17 [ EDGE BP ]
Function: Enable/disable the Band-edge beeper while scanning.
Available Values: ON/OFF
Default: OFF
Set Item 18 [ BELL ]
Function: Select the CTCSS Bell ringer repetitions.
Available Values: OFF/1/3/5/8/REPEAT
Default: OFF
Set Item 19 [ MON/TCL ]
Function: Select the MONI key (just below the PTT switch) function.
Available Values: MONI/T-CALL
Default: Depends on the transceiver version.
MONI: Pressing the [ MONI ] key causes the noise/tone Squelch to be over-ridden, al-
lowing you to listen for weak (or non-encoded) signals.
T.CALL: Pressing the [ MONI ] key activates a 1750-Hz burst tone, used for repeater ac-
cess in many countries.
Set Item 20 [ REV/HM ]
Function: Select the function of the [ REV ( HM ) ] key.
Available Values: REV/HOME
Default: REV
Set Item 21 [ LMP MOD ]
Function: Select the LCD/Keypad Lamp mode.
Available Values: KEY/5SEC/TOGGLE
Default: KEY
Set Item 22 [ TOT ]
Function: Set the TOT time.
Available Values: OFF/1 min/2.5 min/5 min/10 min
Default: OFF
VX-150 O
PERATING
M
ANUAL
Set Mode
45