Yaesu VX-150 Operating Manual page 37

A
UTOMATIC
The VX-150 will automatically illuminate the LCD Lamp whenever the scanner stops on a
signal; this allows you to see the frequency of the incoming signal better at night. Note that
this will, of course, increase the battery consumption, so be sure to switch it off during the
day (the default condition for this feature is "ON".
The procedure for disabling the Scan Lamp is:
•
Press the [ F/W ] key, then press the [ 0 ( SET )] key, to enter the Set mode.
‚
Rotate the DIAL to select Menu #8 ("SCN LMP
ƒ
Press the [ F/W ] key to enable changing of this Menu item.
„
Rotate the DIAL to set this Menu item to OFF.
...
When you have made your selection, press the PTT key to save the new setting and exit
to normal operation.
The VX-150 will automatically "beep" when a band edge is encountered during scanning
(either in standard VFO scanning or during PMS operation). You may disable this feature,
if it is annoying, without disabling the keypad beeper (the default condition for this feature
is "ON".
The procedure for disabling the Band-Edge Beeper is:
•
Press the [ F/W ] key, then press the [ 0 ( SET )] key, to enter the Set mode.
‚
Rotate the DIAL to select Menu #17 ("EDGE BP
ƒ
Press the [ F/W ] key to enable changing of this Menu item.
„
Rotate the DIAL to set this Menu item to OFF.
...
When you have made your selection, press the PTT key to save the new setting and exit
to normal operation.
Default VX-150 set mode have been assigned (at the factory) to the [ 7 ( P1 ) ] and [ 8 ( P2 ) ]
keys. These may be changed by the user, if you wish to define another set mode for a keys.
To change the assignment of a key's set mode:
•
Press the [ F/W ] key, then press the [ 0 ( SET ) ] key, to enter the Set mode.
‚
Rotate the DIAL knob to the menu to be assigned a function.
ƒ
Press and hold in the [ F/W ] key for 1.5 second.
„
Press the [ 7 ( P1 ) ] or [ 8 ( P2 ) ] key to the new setting and exit to set mode.
VX-150 O
PERATING
L I
AMP LLUMINATION ON
B
AND
P
ROGRAMMING THE
M
ANUAL
SCN LMP SCN LMP SCN LMP"). SCN LMP
E B
DGE EEPER
EDGE BP EDGE BP
EDGE BP"). EDGE BP
K F
EY UNCTIONS
Scanning
S S
CAN TOP
37