Display Screen In Camera Mode - JVC GY-HC900CHU Instructions Manual

Display Screen in Camera
Mode
When the display setting for [LCD/VF] B [Display
On/Off] is set to "Off", the corresponding display is
hidden but it will appear for approximately 3
seconds when changes are being made.
Memo :
When the display screen is turned off, it will
0
appear only in the following cases.
Approximately 3 seconds when changes are
0
being made
During event display or warning display
0
Display Screen
d c b a Z
A
282min SDI IN
B 100min 1080 /30p
50min
C
D
COMPRESS
E
ITU709
F
1 /64
ND
G
1 / 60
F2.8
H I
.
Enlarged Display
Enlarged Display (LCD Monitor Only)
G
V
B
d
C X b U a e
.
Memo :
Only the display on the LCD monitor is enlarged.
0
A Voltage/Battery Power
Displays the current status of the power supply
in use.
Memo :
Even when the display screen is turned off and
0
[LCD/VF] B [Display On/Off] B [Battery] is set to
"Off", this will be displayed when there is a
warning.
Y X W V
00: 00: 00.00
S
5 . 6f t
12 :34 : 56
Q
O
AE ±
0
B 5600 K
ISO
102400
J K L M
Z A
B Remaining Space on Media
Displays the remaining recording time of the SD
cards in slot A and slot B separately.
: Currently selected slot. (White card)
W
W z : Write-protect switch of SD card is set.
W!INVALID
W!FORMAT
W!RESTORE
W!INCORRECT :
When the SD card is not supported.
0
When an SD card lower than Class 10 is
0
inserted while in the XHQ mode.
W!REC INH
When attempting to record more than 4
0
GB while a media that does not support
recording of more than 4 GB is inserted.
The following icons are displayed during FTP
upload.
U
Icon
T
R
P
.
N
.
(Yellow)
Memo :
The displayed time is an estimate.
0
Even when the display screen is hidden and
0
[LCD/VF] B [Display On/Off] B [Media
Remain] is set to "Off", this will be displayed
when there is a warning.
Even when the display screen is turned off, this
0
will be displayed in the following cases.
When recording is performed to only one
0
of the slots while [System] B [Record
Set] B [Slot Mode] is set to "Dual".

Display Screen in Camera Mode

: SD card cannot be read or
written to, or restored.
: SD card requires
formatting.
: SD card requires restoring.
:
Status
FTP transfer is in progress.
Three images are alternately
displayed, and the arrows
become animated. In this case,
instead of the recordable time of
the SD card, an estimated value
of the remaining transfer time is
displayed.
Error has occurred during FTP
transfer.
33