Siemens NCC-2F Installation Instructions Manual page 9

Network interface card for pci application with windows
Table of Contents

Advertisement

Figure 20
Successful Driver Installation
15. To verify which COM ports were installed and to
check that there are no issues, access the Device Man-
ager. The Device Manager can be accessed as de-
scribed in the CONFIGURATION section, or equivalent
methods available in Windows XP (i.e. via "My Com-
puter" on the Desktop, selecting "Properties, then
clicking the "Hardware" tab).
16. Once in "Device Manager", click the "+" sign next to
Ports (COM & LPT) as well as Multifunction adapters.
One should then see a screen similar to that shown in
Figure 2. That example displays two NCC-2F cards in-
stalled. They are configured in pairs, i.e., COM 3 and
COM 4 are the first NCC-2F and COM 5 and COM 6
are the second NCC-2F. The NCC uses COM 3 for the
first card and COM 5 for the second card.
Windows 7 (Desigo CC)
Driver folder:
D:\drivers\NCC2F_DRIVERS\OX95x_Windows\Windows
7\UART\amd64
Load the disk in the CD-ROM drive, and adhere to the
following instructions for installing the drivers.
When all is complete, refer to the Device Manager to
check the COM port designations, and view any instal-
lation issues.
The following steps take you through the process:
1. When the NCC-2F card is first installed, Windows 7
detects the new hardware. To verify the detected hard-
ware, access the Device Manager, as described in the
CONFIGURATION section, or equivalent methods avail-
able in Windows 7 (i.e. via ControlPanel/ System
AndSecurity/System address, where a Device Manager
link can be found in top left of window). The screen in
Figure 21 represents an addition of a single NCC-2F card.
Device Manager Displaying One NCC-2F Card
Notes:
1. Windows 7 groups improperly configured hardware
under Other Devices
2. The NCC-2F has added a 2
entries correspond to unconfigured hardware,
previously in the PC)
2. Select one of the PCI Serial Port entries in Other
Devices, and right-click on it. A menu (attached to the
selection) appears, where an "Update Driver Software..."
entry appears - click on this entry. A screen as shown in
Figure 22 displays.
9
Figure 21
nd
PCI Serial Port entry (other

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents