Siemens NCC-2F Installation Instructions Manual page 7

Figure 12
Installing Drivers Window
6. If the drivers were successfully installed, a message
as shown in Figure 13 is displayed.
Figure 13
Successful Driver Installation
7. Click "Finish". Windows then prompts the user to in-
stall the drivers for the serial port. Refer to Figure 14.
Note: Windows XP will use the first available COM port
for communication.
Install From A List Or Specific Location
8. Select "Next>" and search for the folder where the
OXUART_v512_DRIVERS are located. Refer to Figure 15.
Choosing Search and Installation Options
9. After you highlight the folder, click "OK" to proceed.
Now that the path is set, click Next>. Windows XP then
installs the appropriate drivers. When you see the Hard-
ware Installation warning, click "Continue Anyway."
Refer to Figure 16.
7
Figure 14
Figure 15