Siemens NCC-2F Installation Instructions Manual page 8

Figure 16
Hardware Installation Warning
10. If the drivers were successfully installed, a message
as shown in Figure 17 is displayed.
Figure 17
Successful Driver Installation
11. Click "Finish". Windows XP then prompts the user to
install the drivers for the additional PCI Communications
Port. Refer to Figure 18.
Install From A List Or Specific Location
12. Select Next> and search for the CD-ROM drive
where the OXUART_v512_DRIVERS folder is located.
13. After you highlight the folder, click "OK" to proceed.
Now that the path is set, click Next>. Windows XP will
install the appropriate drivers. When you see the fol-
lowing Hardware Installation warning, click "Continue
Anyway." Refer to Figure 19.
Software Installation Warning
14. If the drivers were successfully installed, a message
as shown in Figure 20 is displayed.
8
Figure 18
Figure 19