Display; Tv Aspect; Audio; Speaker Setting - Samsung HT-C330 User Manual

Setup

Display

You can configure various display options such as
the TV Aspect, Resolution, etc.

TV Aspect

Depending on the type of television you have, you
may want to adjust the screen setting.
~ 4:3 Pan-Scan
Select when you want to see the 16:9
video supplied by the DVD without the
black bars on top and bottom, even
though you have a TV with a 4:3 ratio
screen(extreme left and right portion of
the movie picture will be cut off).
4:3 Letter Box
~
Select when you want to see the total
16:9 ratio screen DVD supplies, even
though you have a TV with a 4:3 ratio
screen. Black bars will appear at the
top and bottom of the screen.
16:9 Wide
~
You can view the full 16:9 picture on
your widescreen TV.
✎
NOTE
`
If a DVD is in the 4:3 ratio, you cannot view it in the wide screen.
`
Since DVD discs are recorded in various image formats, they will
look different depending on the software, the type of TV, and the
TV aspect ratio setting.

Audio

Speaker Setting

Speaker Size
You can set the Speaker Size of the Center and Rear
Speakers, as well as Test Tone in this mode.

English
Settings
Speaker Setting
Speaker Size
Sound Edit
Delay Time
Test Tone
Move
For the Front speakers, the mode is set to Small.
~
For the Subwoofer, the mode is set to Present.
~
For the Centre and Rear speakers, you can switch
~
the mode to Small or None.
- Small : Select this when using the speakers.
- None : Select this when no speaker is
connected.
✎
NOTE
`
The speaker mode may vary depending on the Dolby
Pro Logic and Stereo settings.
Sound Edit
You can adjust the balance and level for each speaker.
Settings
Sound Edit
Front Bal. dB L
Rear Bal. dB L
Center Level
Rear Level
SW Level
Change
Move
Press the $% buttons to select and adjust the
desired speaker.
Press the _+ buttons to adjust the settings.
Adjusting Front/Rear Speaker Balance
`
You can select between 0 and -6.
`
The volume decreases as you move closer to –6.
Adjusting Centre/Rear/Subwoofer Speaker Level
`
The volume level can be adjusted in steps from
+6dB to –6dB.
`
The sound gets louder as you move closer to +6dB
and quieter as you get closer to -6dB.
▶
: OFF
Select Return
Select Return
R dB
R
dB
dB
dB
dB
Select Return
Select Return