Brush motor removal and disassembly process
Rotate the head until the vac shoe hose is exposed. Remove
the hose from the mount by pulling it toward you.
Using a T-25 Torx driver, remove the 3 screws on the outer left
side of the upper deck housing.
Place the adjustment knob into position 1 and tip the machine
on its back, note the position of the cam. Using a 10 mm sock-
et on a 1/4" drive ratchet, remove the nut on the height ad-
justment screw.
Remove the 3 screws from the Right side of the deck housing.
15