Recording Through The Dv Input Jack - Samsung DVD-R174 User Manual

M
`
You can not change the recording mode and the program while recording.
`
Recording will stop automatically if there is no free space left on the disc.
`
Up to 99 titles can be recorded onto a DVD-RAM/RW/-R disc.
`
If the power interrupted due to power failure or other reasons, the title being recorded will not be saved onto the disc.
`
Recording will stop automatically if a copy protected image is selected.
`
Do not use DVD-R authoring discs with this unit.
`
Refer to the user manual for your External Devices when recording from external equipment using the Audio/Video
cable.

recording tHroUgH tHe dV inPUt jack

You may control a Camcorder connected to the DV Input jack on the DVD Recorder.
Follow these directions to record onto a disc from a camcorder that has a DV output jack.
1. Connect the DV output jack of your camcorder to the DV input
jack on the front of your DVD Recorder using a DV cable.
2. Power on your DVD Recorder and switch to DV mode by pressing
the inPUt sel. button on the remote control.
3. Press the rec Mode button repeatedly to select the recording
Speed (quality).
→ HQ → HsP → sP → lsP → esP → lP → eP → slP
4. If the input is set to DV, a playback/record menu that enables camcorder control appears on the top of
the screen.
5. Select the Playback related icons on the upper part of the screen to playback the camcorder and find the
starting position for dubbing.
6. To start recording, Press the ◄ ► buttons to select rec () icon in the top side of the screen, then
press the enter button.
You can press the rec button on the remote control to start recording.
7. Press the stoP button on your DVD Recorder when the recording is finished.
M
`
Some camcorders may not work with your DVD Recorder even if they have a DV output jack.
`
Also refer to the user manual for your camcorder when recording through a DV jack.
`
To display playback related icons on the screen, press any direction button on the remote control.
DV Tape Mode
( @ # * + ) !
Exit
< Move sEnter