Samsung DVD-P380 User Manual page 16

C
O N N E C T I O N S
Connecting to an
1
If using a Coaxial cable (not included), connect the
AUDIO OUT (COAXIAL) jack on the rear of the DVD player to
the DIGITAL AUDIO IN (COAXIAL)
2
Using the video signal cable(s), connect the VIDEO,
COMPONENT jacks on the rear of the DVD player to the
VIDEO, COMPONENT jacks of your
12 to 14.
3
Turn on your DVD player, TV, and Amplifier.
4
Press the input select button of the
input your DVD player is connected to in order to hear sound.
Refer to your Amplifier's user manual to set the Amplifier's
audio input.
Note
- Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause
damage to the speakers and your ears.
- Please set the audio in the menu screen according to the Amplifier you have connected. (See pages 47 to 48)
- The position of jacks may vary depending on the Amplifier.
Please refer to the user's manual of the Amplifier.
Audio System (Dolby digital, MPEG2 or DTS Amplifier)
DIGITAL
jack of the Amplifier.
TV as described on pages
Amplifier to select the audio
Dolby digital or
DTS amp
ENG-16
DIGITAL AUDIO
Coaxial Cable
(not included)