Samsung DVD-P380 User Manual page 10

Rear Panel
1. DIGITAL AUDIO OUT JACKS
- Use either an coaxial digital cable to connect to a
compatible Dolby Digital receiver.
- Use a coaxial digital cable to connect to an A/VAmplifier
that contains a Dolby Digital, MPEG2 or DTS decoder.
2. COMPONENT VIDEO OUT JACKS
- Use these jacks if you have a TV with Component
Video in jacks. These jacks provide P
P-SCAN (480p)
- If
the Setup Menu, progressive scan mode will work.
I-SCAN (480i)
- If is set to "ON" in Video Output of the
Setup Menu, interlaced scan mode will work.
Note
- Consult your TV User's Manual to find out if your TV supports Progressive Scan (P-SCAN).
If Progressive Scan is supported, follow the TV User's Manual regarding Progressive Scan settings in the
TV's menu system.
- See pages 49 ~ 50 to get more information on how to use the setup menu.
S
E T U P
3
, P and Y video.
R B
is set to "ON" in Video Output of
1
4
2
3. AUDIO OUT JACKS
Use audio cables to connect to the
your television or audio/video receiver
4. VIDEO OUT JACK
- Use a video cable to connect to the Video input jack on
your television.
ENG-10
Audio input jacks of