Table of Contents
Advertisement
Description-Front Panel
Front Panel Controls
STANDBY / ON
1
• When the unit is first plugged in, the indicator lights.
When STANDBY/ON is pressed on again, the light
goes out and the player is turned on.
HEADPHONES JACK
2
• You can attach headphones here for private listening.
HEADPHONES VOLUME
3
• Use to adjust headphones volume level.
4
DISC TRAY
• Load the disc here.
DISPLAY
5
• Operation indicators are displayed here.
OPEN/CLOSE
6
• Press to open and close the disc tray.
Front Panel Display
Angle indicator. You can select multiple angles
1
of a scene recorded by different cameras.
Disc type indicators
2
Reverse play / Pause / Forward play
3
Lights when 3D surround is turned on.
4
DVD : Title number
5
DVD : Chapter number.
6
Video/Audio CD : Track number
7
Repeat play mode
8
8
PLAY/PAUSE
7
• Begin or pause disc play.
8
STOP
• Stops disc play.
SKIP
9
• Use to skip a scene or music.
JOG
10
• Use to access certain
Shuttle features with the Shuttle dial
When JOG is
pressed, indicator lights up.
.
SHUTTLE
11
• Use during DVD and CD play to fast forward or
reverse.
In JOG mode(JOG button pressed), used for frame advance/CD track selection.
Linear PCM audio output
9
Dolby Digital Disc
10
DTS (Digital Theater System) output
11
MPEG-2 Audio output
12
Displays various messages concerning
13
operations such as PLAY, STOP, LOAD, RANDOM, ...
no DISC : No disc loaded.
OPEN : The disc tray is open.
LOAD : Player is loading disc
information.
Description-Rear Panel
Rear Panel
:
DIGITAL AUDIO OUT JACKS
1
• Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver.
Use to connect to an A/V Amplifier that contains a
ANALOG AUDIO OUT JACKS
2
• Connect to the Audio input jacks of your television, audio/video receiver, or VCR.
VIDEO OUT JACK
3
• Use a video cable to connect to the Video input jack on your television.
4
S-VIDEO OUT JACK
• Use the S-Video cable to connect this jack to the S-Video jack on your television for a higher quality
picture. The S-Video must be selected in the VIDEO OUT SELECT.
COMPONENT VIDEO OUT JACKS
5
• Use these jacks if you have a TV with Component Video in jacks. These jacks provide Pr, Pb and Y
video. Along with S-Video, Component Video provides the best picture quality. The Y, Pb, Pr must be
selected in the VIDEO OUT SELECT.
6
VIDEO OUT SELECT SWITCH
• Use the switch to set video out.
• If Y, Pb or Pr is selected, S-Video will not work.
• If S-Video is selected, Y, Pb or Pr will not work.
Dolby Digital or DTS
decoder.
9
Hide quick links:
Advertisement
Table of Contents
