Samsung DVD-HD870 User Manual page 53

C
H A N G I N G
TV Aspect
Depending on a type of television you have,
you may want to adjust the screen setting
(aspect ratio).
- 4:3 Letter Box : Select when you want to
see the total 16:9 ratio screen DVD
supplies, even though you have a TV with a
4:3 ratio screen. Black bars will appear at
the top and bottom of the screen.
- 4:3 Pan&Scan : Select this for conventional
size TVs when you want to see the central
portion of the 16:9 screen. (Extreme left and
right side of movie picture will be cut off.)
- 16:9 Wide : You can view the full 16:9
picture on your wide screen TV.
DISPLAY SETUP
Aspect Ratio TV Aspect : 16:9 Wide
4:3 Letter Box
Still Mode
4:3 Pan&Scan
Screen Messag
16:9 Wide
Video Output
HDMI
Picture Quality
Setup
Enter Return Menu
Still Mode
These options will help prevent picture shake
in still mode and display small text clearer.
- Auto : When selecting Auto, Field/Frame
mode will be automatically ajusted.
- Field : Select this feature to minimize
screen shaking.
- Frame : Select this feature when you want
to read text more clearly on the screen .
Screen Messages
Use to turn on-screen messages On or Off.
Video Output
Select Video Output.
- S-Video : Select when you want to use
Video and S-Video Out.
- I-SCAN : Select when you want to use
Video and Component 525i(Interlace) Out.
- P-SCAN : Select when you want to use
Component 525p(Progressive) Out or
HDMI.
• If you press the VIDEO SEL. button, Video
output mode is changed in regular
sequence in no disc mode.
(S-Video I-SCAN
S
E T U P M E N U
❿ ❿
❿ ❿
P-SCAN)
ENG-53
• If the Yes/No selection in the Display Setup
sub Menu is not made within 10 seconds,
the screen returns to the previous menu.
HDMI
This setting is used when the unit is
connected by HDMI to Display devices (TV,
Projector, etc.).
- Resolution Setting
The resolution setting is dependent on the
capability of your TV or Monitor.
- Auto : Auto resolution setting
- Manual : Manual resolution setting
- Resolutions
• 480p : 720 x 480
• 720p : 1280 x 720
• 1080i : 1920 x 1080
For best video performance, check your
TV's user manual for proper resolution
setting.
- Format
You can use this function to set the HDMI
output's Format.
- TV - RGB : Select this when you want to
connect to an RGB supported TV.
- Monitor : Select this when you want to
connect to a monitor.
- TV : Select this when you want to
connect to a standard TV.
• If you press the VIDEO SEL. button, Video
output mode is changed in regular
sequence. The unit must be stopped, or
there must be no disc mode in the unit.
(S-Video I-SCAN
HDMI SETUP
Resolution Setting : Manual
Resolution : 720p
Format : TV-RGB
Setup
Enter Return Menu
P-SCAN)