DVD-Recorder
System
No Disc
Timer Rec.
Timer Rec.
Set Top Box Control
CM Skip Time
: 15 Sec
Setup
Setup
EP Mode Time
: 6 Hours
Chapter Creator
: Off
Quick Recording
: Off
Off
On
Anynet+(HDMI-CEC) : On
MOVE
ENTER
RETURN
EXIT
DVD-Recorder
System
No Disc
Timer Rec.
Timer Rec.
Set Top Box Control
CM Skip Time
: 15 Sec
Setup
Setup
EP Mode Time
: 6 Hours
Chapter Creator
: Off
Quick Recording
: Off
Anynet+(HDMI-CEC)
Off
: On
On
MOVE
ENTER
RETURN
EXIT
■
Set the chapter creator to on and then start recording. Stopping
the recording will automatically create a chapter menu.
■
This function only works for normal recording.
- After the recording has begun, the "Do you want to create the
chapter menu after this recording?" message appears for 10
seconds. Select Yes or No.
- Selecting Yes will create a new chapter menu while selecting No
will not.
- A new chapter is created according to the selected recording
mode. A chapter will be about 5 minutes long in XP and SP, and
about 15 minutes long in LP and EP mode.
■
To display the created chapters and fi nalize the disc, press the
DISC MENU button. The chapters menu appears.
■
The Automatic Chapter Creation function does not work during
Timer Recording or when you turn the power off.
▌
Quick Recording Setting
It takes about 10 seconds for a disc to load (initialize) every time
►
you turn on the unit. To bypass this initialization process, you can
►
►
set the Quick Recording feature to On. This enables you to record
►
immediately without having to wait for the disc to load.
►
►
1. With a disc inserted and the unit in Stop mode, press the MENU button
on the remote control.
2. Select Setup using the ▲▼ buttons, then press the ENTER or ►
button.
3. Select System using the ▲▼ buttons, then press the ENTER or ►
button.
System menu will be displayed.
4. Select Quick Recording using the ▲▼ buttons, then press the
ENTER or ► button.
Quick Recording menu will be displayed.
5. Select On using the ▲▼ buttons, then press the ENTER or ► button.
■
The Quick Recording is set to Off as default.
■
If the Quick Start Recording is set to On, the fan may continue to
operate after the unit is shut off.
▌
Anynet+(HDMI-CEC)
Anynet+ is a function that can be used to operate the recorder using
►
a Samsung TV remote control, by connecting the DVD Recorder to
►
a SAMSUNG TV using an HDMI Cable. (see page 18) (This is only
►
►
available with SAMSUNG TVs that support Anynet+.)
►
►
1. With the unit in Stop mode/No Disc mode, press the MENU button on
the remote control.
2. Select Setup using the ▲▼ buttons, then press the ENTER or ► button.
3. Select System using the ▲▼ buttons, then press the ENTER or ►
button. The system menu will be displayed.
4. Select Anynet+(HDMI-CEC) using the ▲▼ buttons, then press the
ENTER or ► button.
Anynet+(HDMI-CEC) items will be displayed.
5. Select On using the ▲▼ buttons, then press the ENTER or ► button.
English - 35