Reference; Firmware Upgrade - Samsung DVD-1080PK Owner's Manual

REFERENCE

REFERENCE

Firmware upgrade

Introduction
Samsung will often support the software upgrade to
improve the performance of this unit to the latest
status, through Samsung Internet Site
(www.samsung.com).
Because the specially new mpeg4 codec continues and
it is appearing. What improvements are made depends
on the upgrade software you are using as well as the
software that your DVD-player contained before the
upgrade.
How to make an upgrade disc
Write the downloaded file onto a blank CD-R or CD-
RW disc, using the following settings:
1. You have to download a new file through Download Center
of Samsung Internet Site (www.samsung.com).
2. Write the file to Disc using CD-RW of your computer.
Note
- File System CD-ROM ISO Level
- Character set ISO 9660
- Finalized, single session
- Write speed low
Upgrade procedure
1. Open the disc tray. Place the disc on the tray. Close the
tray. The Firmware upgrade screen appears.
2. Press the ¦/‹ buttons to select Total, then press the
- In the middle of the writing, the tray will open
- If the unit was succesfully updated, the unit will turn off
3. Press the number buttons to select the desired language
Note
- If the "Select Menu Language" doesn't appear,
- Do not press any button and unplug the power
- The upgrade procedure may change, refer to
Old Version : 071109V1.B.1080PKXEG
New Version : 071204V8.B.1080PKXEG
Firmware upgrade
appears on the display
ENTER button.
Old Version : 071109V1.B.1080PKXEG
New Version : 071204V8.B.1080PKXEG
Firmware upgrade starts
automatically. After taking out the disc, please wait for
about 2 minutes.
and on after closing the tray automatically. When the
unit turns on, this screen will display.
please contact to "Samsung Service Center".
code during upgrade.
the web site (www.samsung.com).
Press 1 for English
Touche 2 pour Français
Drücken Sie 3 für Deutsch
Pulsar 4 para Español
Premere 5 per Italiano
Druk op 6 voor Nederlands
33