Setting Up The Display Options - Samsung DVD-1080PK Owner's Manual

Setting up Test
The test output signals come clockwise starting
from the Front Speaker(L).
Adjust Channel Balance so that speakers output
equally in your room.
FRONT(L) ➝ CENTER ➝ SUBWOOFER ➝
FRONT(R) ➝ SURROUND(R) ➝ SURROUND(L)
Note
To make the Setup menu disappear or return to
menu screen during set up, press RETURN button.
• The subwoofer test output signal is lower
than the other speakers.
• The MPEG Multichannel logo is a trademark
registered by PHILIPS Corporation.
• If you set Front (L, R) "Small", LFE
(Subwoofer) is set "On" automatically.
Setting Up the Display
Options
Display options enable you to set various video functions of
the player.
1. With the unit in Stop mode, press the MENU button.
2. Press the / buttons to select Setup, then press the
or ENTER button.
3. Press the / buttons to select Display Setup, then
press the or ENTER button.
4. Press the buttons to select the desired item, then
/
press the or ENTER button.
❶
TV Aspect
Depending on a type of television you have, you may want
to adjust the screen setting (aspect ratio).
- 4:3 Letter Box : Select when you want to see the total
16:9 ratio screen DVD supplies, even though you
have a TV with a 4:3 ratio screen. Black bars will
appear at the top and bottom of the screen.
- 4:3 Pan&Scan : Select this for conventional size TVs
when you want to see the central portion of the 16:9
screen. (Extreme left and right side of movie picture
will be cut off.)
- 16:9 Wide : You can view the full 16:9 picture on your
wide screen TV.
❷
Still Mode
These options will help prevent picture shake in still
mode and display small text clearer.
- Auto : When selecting Auto, Field/Frame mode will be
automatically converted.
- Field : Select this feature when the screen shakes in
the Auto mode.
- Frame : Select this feature when you want to see
small letters more clearly in the Auto mode.
❸
Screen Messages
Use to turn on-screen messages On or Off.
❹
TV System
- NTSC : In case of using NTSC disc
• If your TV system only has PAL-Video input, you must
choose "PAL". When you choose "PAL", Interlace out-
put format is PAL 60 Hz output.
• If your TV system only has NTSC, input you must
choose "NTSC ".
• If you set up the NTSC TV, HDMI output frame rate is 60 Hz.
- PAL : In case of using PAL disc
• If your TV system only has NTSC-Video input, you
must choose "NTSC".
• If your TV system only has PAL input, you must
choose "PAL ".
• If you set up the PAL TV, HDMI output frame rate is 50 Hz .
Language Setup
Audio Setup
Display Setup
Parental Setup :
DivX(R) Registration
Anynet+(HDMI-CEC):On
Enter Return Menu
❺ Video Output
Select Video Output.
- P-SCAN : Select when you want to use Component
Progressive (525p) Out.
- SCART-CVBS : Select when you want to CVBS output
from scart connection.
- SCART RGB Output : Select when you want to use
Scart Out.
• If you press the VIDEO SEL. button, Video output
Aspect Ratio
mode is changed in regular sequence in no disc
mode. (P-SCAN ➝ SCART CVBS ➝ SCART RGB)
DISPLAY SETUP
: 16:9 Wide
TV Aspect
4:3 Letter Box
Still Mode
4:3 Pan&Scan
Screen Message
√ 16:9 Wide
TV System
Video Output : SCART RGB
HDMI
Picture Quality
Enter Return Menu
DISPLAY SETUP
TV Aspect : Wide
Still Mode : Auto
Screen Messages : On
TV System
NTSC
Video Output √ PAL
HDMI
Picture Quality
Enter Return Menu
29