Table of Contents
Advertisement
C
ontrolling a TV with the Remote
The remote can also be set up to control most TVs. To program the remote, use the
code that corresponds to your brand.
1
Turn on the TV
1
2
Point the DVD's remote at
2
the TV.
3
While holding the TV
3
POWER button down, enter
the code for your brand.
e.g
For Samsung D TVs
While holding down the TV
button, enter 0.
32
TV Codes
CODE
BRAND
0
SAMSUNG D
SAMSUNG F, LG A, LOEWE, PHILPS, FINLUX A,
1
YOKO, LOEWE OPTA A, MITSUBISHI A,
PHONOLA A, RADIOLA A,SCHNEIDER
2
SAMSUNG A
3
SAMSUNG B
4
SAMSUNG C
5
SAMSUNG E
6
TOSHIBA A
7
PANASONIC A
8
GRUNDIG A, BLAUPUNKT, SIEMENS
9
SHARP A
SETUP
HITACHI A
DISPLAY
SANYO A, AKAI, FISHER
OPEN/CLOSE
HITACH B, SABA A, THOMSON A, NORDMENDE A
THOMSON B, SABA B, TELEFUNKEN A, NORDMENDE B
AUDIO
BRANDT, FERGUSON, PIONEER A, TELEAVIA, HITACH C
SUB TITLE
SONY A
TOSHIBA B, SANYO B, SHARP B, SONY B, MITSUBISHI B
DVD POWER
ANGLE
TOSHIBA C, GRUNDIG B, FINLUX B
TOSHIBA D
TOP MENU
MENU
TOSHIBA E
PHILIPS A, PHONOLA B, RADIOLA B
RETURN
REV SEARCH
TOSHIBA F, GRUNDIG C, CGE, IMPERIAL, MIVAR
SABA C, BANG&OLUFSEN, LOEWE OPTA B, BRIONVEGA
REPEAT
FINLUX C, FORMENTI, PHILIPS B, SINGER, SINUDYNE
METZ, WEGA, PHONOLA C, RADIOMARELLI
NOKIA, PANASONIC B, SABA D, PIONEER B
FWD SEARCH
REX, SELECO, SALORA
HITACHI D, NORDMENDE C, PANASONIC C,THOMSON C
BACK SKIP
SABA E, TELEFUNKEN B, CONTINENTAL EDISON
PLAY/PAUSE
PANASONIC D
NEXT SKIP
PANASONIC E
STOP
PANASONIC F
STEP
TELEFUNKEN C
CLEAR
MIVAL
MODE
LG B
A-B REPEAT
SHARP C
BOOKMARK
JVC
4
If the TV turns off, setup is com-
4
plete.
Enter other codes of the same brand if
the first code does not work.
5
To operate the TV, use the "TV
5
Function Buttons" described on
page 14.
NOTE
The remote may not be able to control every
model TV of the brands listed.
Before requesting service (troubleshooting)
Problem
• Check the batteries in the remote. May need replacing.
No operations can be
• Operate the remote control at a distance of no more than 20
feet.
performed with remote.
• Remove batteries and hold down one or more buttons for
several minutes to drain the microprocessor inside the
remote to reset it. Reinstall batteries and try remote again.
• Ensure that the disc is installed with the label side facing up.
Disc does not play.
• Check the region number of the DVD.
• This player cannot play CD-ROMs, DVD-ROMs, CD-R, etc.
Insert a DVD, a VIDEO-CD or a CD.
• 5.1 channel sound is reproduced only when the following
conditions are met. :
5.1 channel sound is
1)The DVD player is connected with the proper amplifier
not being reproduced.
2)The disc is recorded with 5.1 channel sound.
• Check whether the disc being played has the "Dolby 5.1 ch"
mark on the outside.
• Check if your audio system is connected and working properly.
• The features or action cannot be completed at this time
because:
The
icon appears
1. The DVD's software restricts it.
on screen.
2. The DVD's software doesn't support the feature (e.g., angles).
3. The feature is not available at the moment.
4. You've requested a title or chapter number or search time
that is out of range.
Disc Menu doesn't
appear.
• Check if the disc has a Menu.
Playback mode differs
• Some of the functions selected in the Setup Menu may not
from the Setup Menu
work properly if the disc is not encoded with the correspond-
selection.
ing function.
The screen ratio can-
not be changed.
• The Screen Ratio is fixed on your DVDs.
No audio.
• Make sure you have selected the correct Digital Output in
the Audio Options Menu.
• Press power on from a cold start with no disc in the unit. Press
the STOP and PLAY buttons simultaneously on the front panel
for three seconds. The Select Menu Language display will
Forgot password
appear. Select the desired language button. Press the SETUP
button on the remote control to select the Parental Mode. The
Parental Mode is now unlocked as indicated on the display.
Press the DOWN button to select Parental. Press ENTER and
the Create Password display will appear. You can now set your
rating level and change your password to a new number.
• Go to the contents and find the section of the instruction
book that contains the explanations regarding the current
If you experience other
problem, and follow the procedure once again.
problems.
• If the problem still cannot be solved, please contact your
nearest authorized service center.
T
roubleshooting Guide
Action
Page
P4
P7
P12-13
P16-19
P22-26
P21-22
P26-31
P31
P30
P29
33
Advertisement
Table of Contents
