Table of Contents
Advertisement
Quick Links
DVD739+839
11/4/95 11:19 AM
S
afety Information
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates "dan-
gerous voltage" inside the
product that presents a risk
of electric shock or person-
al injury.
CAUTION:
DVD PLAYERS USE AN INVISIBLE LASER BEAM WHICH CAN CAUSE
HAZARDOUS RADIATION EXPOSURE IF DIRECTED.
BE SURE TO OPERATE PLAYER CORRECTLY AS INSTRUCTED.
CAUTIONS
Caution:
To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Attention:
Pour éviter les chocs électriques, introduíre la lame la plus large de la fiche
dans la borne correspondante de la prise et pousser jusqu au fond.
This product satisfies FCC regulations when shielded cables and connectors are used to
connect the unit to other equipment. To prevent electromagnetic interference with electric
appliances, such as radios and televisions, use shielded cables and connectors for connec-
tions.
FCC NOTE (for U.S.A):
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect this equipment into an outlet on a circuit different from that to which the receiv-
er is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This class B digital apparatus meets all requirements of the Canadian Interference --
Causing Equipment Regulations.
Page 2
TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE THE
COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE
INSIDE. REFER SERVICING TO QUALI-
FIED SERVICE PERSONNEL.
This symbol indicates
important instructions
accompanying the product.
WARNING
To reduce the risk of fire or shock haz
ard, do not expose this DVD player to
rain or moisture.
CAUTION
THIS PRODUCT UTILIZES A
LASER. USE OF CONTROLS OR
ADJUSTMENTS OR PERFOR-
MANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZ-
ARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVER AND DO
NOT REPAIR YOURSELF. REFER
SERVICING TO QUALIFIED PER-
SONNEL.
Note:
• This unit can be used only where the
power supply is AC 120V, 60Hz. It
cannot be used elsewhere.
• This DVD player is designed and
manufactured to respond to the
Region Management Information. If
the Region number of a DVD disc
does not correspond to the Region
number of this DVD player, this DVD
player cannot play the disc.
• This device is protected by U.S.
patent numbers 4,631,603 and
4,577,216 and 4,819,098 and other
intellectual property rights. The use
of Macrovision's copy protection
technology in the device must be
authorized by Macrovision and is
intended for home and other limited
pay-per-view uses only, unless other
wise authorized in writing by
Macrovision. Reverse engineering or
disassembly is prohibited.
CLASS 1
LASER PRODUCT
LUOKAN 1 LASER LAITE
KLASS 1
LASER APPARAT
Advertisement
Table of Contents
Related Manuals for Samsung DVD-839
Summary of Contents for Samsung DVD-839
-
Page 1: Repeat Play
FCC NOTE (for U.S.A): This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reason- able protection against harmful interference in a residential installation. This equipment... -
Page 2: Using The Zoom And 3D Sound Functions
• When condensation forms inside the player, the player may not operate correctly. If this occurs, leave the player at room temperature until t inside of the player becomes dry and operational. • If condensation forms on a disc, wipe the disc with a soft and dry cloth by moving the cloth from the center hole toward the outer edge. Handling Cautions... -
Page 3: Specifications (Dvd-739)
DVD739+839 11/4/95 11:19 AM Page 4 TABLE OF CONTENTS... -
Page 4: Table Of Contents
• Connecting to a TV • Connecting to an Audio System Playing a Disc ... 18 Searching & Skipping through a Chapter or Track ... 20 Using the Display Function ... 21 Using the Disc View Function ... 25 Selecting Audio ... 26 Selecting the Subtitle Language ... -
Page 5: Disc Features
COPY PROTECTION • Many DVD discs are encoded with copy protection. Because of this, you should only connect your DVD player directly to your TV, not to a VCR. Connecting to a VCR results in a distorted picture from copy-protected DVD discs. -
Page 6: Disc Type And Characteristics
• Playback Region Number Playback Region Number Both the DVD player and the discs are coded by region. These regional codes must match in order for the disc to play. If the codes do not match, the disc will not play. -
Page 7: Description
LEVEL To Connect Headphones (not included) (DVD-839 only) Connect headphones with a standard stereo plug to the headphone jack (M6). • Before connecting, set headphone volume at minimum. Then adjust to a suitable volume. DVD-839 Front Panel Controls STANDBY LAMP •... -
Page 8: Front Panel (Dvd-739)
SPATIALIZER N-2-2 Front Panel Controls STANDBY LAMP • When the unit is first plugged in, the indi cator lights. When power is pressed on, the lamp goes out. POWER ON/OFF • Use to turn your player on and off (standby). - Page 9 ANALOG AUDIO OUT JACKS • Connect to the Audio input jacks of your television, audio/video receiver, or VCR. VIDEO OUT JACKS • Use a video cable to connect one of these jacks to the Video input on your television. DVD-839 OPTICAL...
- Page 10 ANALOG AUDIO OUT JACKS • Connect to the Audio input jacks of your television, audio/video receiver, or VCR. VIDEO OUT JACK • Use a video cable to connect this jack to the Video input on your television. DVD-739 DIGITAL ANALOG AUDIO OUT...
- Page 11 REPEAT Button • Allows you to repeat play a title, chapter, track, or disc. TV POWER Button • Use to set the remote to control a compa ble TV. VOLUME CON. Button • To control the master volume of the play...
- Page 12 (+ and -) are aligned correctly. Replace the battery cover. If remote doesn’t operate properly: • Check the polarity + - of the batteries (Dry-Cell) • Check if the batteries are drained. • Check if remote sensor is blocked by obstacles.
-
Page 13: Choosing A Connection (Dvd-839)
11/4/95 11:20 AM Page 14 hoosing a Connection The following show examples of connections commonly used to connect the DVD player with a TV and othe components. Before Connecting the DVD Player • Always turn off the DVD player, TV, and other components before you connect or disconnect any cables. -
Page 14: Connecting To An Audio System
Digital Audio Input Jacks OPTICAL COAXIAL OPTICAL COAXIAL DIGITAL AUDIO OUT Digital Audio Out Connecting to an Audio System DVD Player + 2ch Stereo Amplifier or Dolby Pro Logic Decoder DVD Player + Amplifier with Dolby Digital Decoder/DTS Decoder SYST PLAY... - Page 15 11/4/95 11:20 AM Page 16 hoosing a Connection The following show examples of connections commonly used to connect the DVD player with a TV and othe components. Before Connecting the DVD Player • Always turn off the DVD player, TV, and other components before you connect or disconnect any cables.
- Page 16 Dolby Digital Decoder Digital Audio Input Jack DIGITAL AUDIO OUT Digital Audio Out Connecting to an Audio System DVD Player + 2ch Stereo Amplifier or Dolby Pro Logic Decoder DVD Player + Amplifier with Dolby Digital Decoder/DTS Decoder SYST PLAY...
-
Page 17: Playing A Disc
Disc 1.,3. 1.,3. Before Playback • Turn on a TV and press the TV/VIDEO button to select video mode. • Turn on your Audio System to select AUX, CD or DVD. • Refer to your AUDIO Owner’s Manual. - Page 18 RESUME function When you stop disc play, the player remembers where you stopped, so when you press PLAY again, it will pick up where you left off (unless the disc is removed, the STOP button is pressed twice or the player is unplugged.).
-
Page 19: Searching & Skipping Through A Chapter Or Track
NOTE • Though 2X SCAN AUDIO is ON in SETUP MENU, no sound will be heard on discs which are recorded with LPCM, DTS or MPEG- • Depending on the disc, audio may not be heard when a disc is in 2X playback mode. -
Page 20: Using The Display Function
Display Function If you want to display the title, chapter, time, audio and subtitle information on a DVD, press the DISPLAY bu ton. If you want to display the track and time information on a VCD or CD, press the DISPLAY button. - Page 21 DVD739+839 11/4/95 11:21 AM Page 22 epeat Play Repeat play allows you to repeat a track, title, or the entire disc. 1.,1 1.,1 2.,2 2.,2 3.,3 3.,3 4.,4 4.,4 • DVD repeats playback by chap- ter or title, CD and VCD repeat playback by disc or track.
- Page 22 • The A-B Repeat function works on the same title or track. • If the title or track is completed before marking the end (B), the end of title or track becomes B automatically. NOTE •...
- Page 23 11/4/95 11:21 AM Page 24 rogram Playback in a Specific Order Program playback lets you set up a specific order for playback of titles, chapters or tracks on a disc only. Th function works in stop mode only. 4.,4 4.,4 1.,1...
-
Page 24: Using The Disc View Function
• When in VCD 1.1 & 2.0 mode (MENU OFF mode), this function works. NOTE • In stop mode on VCD, press the TOP MENU button and the TRACK VIEW will be displayed directly. Track View (VCD) Displays the beginning view of each track and the track number. -
Page 25: Selecting Audio
DVD739+839 11/4/95 11:21 AM Page 26 electing Audio You can select a desired language quickly and easily with the AUDIO button. If a menu is encoded on the di you can also select by using the MENU button. 2.,2 2.,2 3.,3... -
Page 26: Selecting The Subtitle Language
Page 27 electing the Subtitle Language When a DVD is recorded with subtitles, you can use the Subtitle feature to view the subtitles on-screen. If a menu is encoded on the disc, you can also select by using the MENU button. - Page 27 • This function is disc-dependent, and may not work with all DVDs. NOTE • This function does not work when a DVD has not been recorded with a multi-camera angle system. Using the ANGLE button Check to see if an ‘ANGLE ( the upper right hand corner of the screen.
- Page 28 11/4/95 11:21 AM Page 29 sing the Bookmark Function The Bookmark function lets you select parts of a DVD or VCD (MENU OFF mode) so that you can quickly find the section at a later time. 1.,1, 1 1 1.,1, 2., 2 2...
- Page 29 • When the DIGITAL OUTPUT is set to BITSTREAM in the SETUP MENU, the Volume Control function will not work. • 3D Sound is possible only on discs recorded using DOLBY SURROUND or DOLBY DIGITAL. However, some of these discs do no contain rear channel sound signals.
-
Page 30: Using The Setup Menu
Setup Menu The Setup menu lets you customize your DVD player by allowing you to select various language preferences, set up a parental level, even adjust the player to the type of television screen you have (i.e. widescreen). -
Page 31: Setting Up The Language Features
11/4/95 11:22 AM Page 32 etting Up the Language Features If you set the player menu, disc menu, audio and subtitle language in advance, it will come up automatically every time you watch a movie. Using the Player Menu Setting up in ENGLISH. - Page 32 How to make the SETUP MENU disappear or return to menu screen during set up. Press RETURN button. NOTE If the selected language is not recorded on the disc, the original pre-recorded language is selected. Using the Audio Language Setting up in ENGLISH. Press the SETUP button when in play or stop mode.
-
Page 33: Setting Up The Parental Level
Up the Parental Level The Parental Level function works in conjunction with DVDs that have been assigned a rating - which helps control the types of DVDs that your family watches. There are up to 8 rating levels on a disc. •... - Page 34 Press RETURN button. • Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby NOTE Laboratories. Confidential unpublished works. ©1992-1997 Dolby Laboratories Inc. All rights reserved.
- Page 35 Page 36 etting Up Display Options 2.,3.,4. 2.,3.,4. Use the UP/DOWN button to select the desired item. Then press the ENTER button. TV ASPECT 4:3 LETTER BOX : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen.
-
Page 36: Controlling A Tv With The Remote
11/4/95 11:22 AM Page 37 ontrolling a TV with the Remote The remote can also be set up to control most TVs. To program the remote, use the code that corresponds t your brand. NOTE The remote may not be able to control every model TV of the brands listed. -
Page 37: Troubleshooting Guide
Guide Proper function of your DVD player is mostly dependent on the discs you play. When some of the functions indicated in the I/B do not work properly, it is highly probable that the disc is responsible. We strongly recommend you review the instruction book before you start using the player. -
Page 38: Specifications (Dvd-839)
*Total Harmonic Distortion DVD-839 AC 120 V, 60 Hz 19 W 7.5 lbs Weight W 16.9 in x D 11.0 in x H 3.5 in Dimensions +41°F to +95°F 10% to 75% Reading Speed : 11.45 ft/sec. Approx. Play Time (Single Sided, Single Layer Disc) : 135 min. - Page 39 *Total Harmonic Distortion DVD-739 AC 120 V, 60 Hz 18 W 7.5 lbs Weight W 16.9 in x D 11.0 in x H 3.5 in Dimensions +41°F to +95°F 10% to 75% Reading Speed : 11.45 ft/sec. Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.
-
Page 40: Warranty
SAMSUNG will repair or replace this product, at our option and at no charge with new or reconditioned parts, if found to be defec tive during the limited warranty period specified above. The product must be returned during the warranty period with transporta- tion charges prepaid to SAMSUNG's designated service center. - Page 41 On carry-in models, transportation to and from the service center is the customer’s responsibility. The original dated sales receipt must be retained by the customer and is the only acceptable proof of purchase. It must be pre- sented to the authorized service center at the time service is requested.